Assembly tools

UTIL INSER/EXTRAC CTOS SUB.D

for single D-Sub standard contacts

UTIL INSERCION CTOS Han D

for crimp contacts

Removal Tool Han D-Sub contacts

Han-Modular®, for D-Sub crimp contact

D SUB HD INSERTION EXTRACTION TOOL

for single D-Sub high density contacts

Mounting tool Han D/E/Yellock

for crimp contacts, Small cross-section, Variable length of blade, Han D®, Han E®, Han-Yellock®

UTIL INSERCION CTOS. GDS E/F/M

DIN 41612, for contacts FC 1, FC 2 and FC 3

LLAVE FIJACION CTOS. SERIE Han K

for axial screw, With grip, 40 A contactWrench size: 2

preLink Assembly tool

for preLink® termination block

Betaetigungswerkzeug f.Han ES

for Han® ES insert

hexagonal wrench adapter SW2

Bit ¼in, 40 A contact, for axial screwWrench size: 2

UTIL INSERCION CTOS GDS B-C

DIN 41612, for contacts BC / har-bus® 64

Single Bit guiding pins/bushes

M12 dynamometric screwdriver SW15

for M12 Slim DesignWrench size: 15

hexagonal wrench adapter SW2,5

Bit ¼in, 70 A contact, for axial screwWrench size: 2.5

Torque Set Power Contacts SW2,5/2/PH2

for power contact, incl. reversing blade (AF 2.0 + AF 2.5 + PH2), + different bits, + adapter blade, Tightening torque: 1 ... 5 Nm

insertion/removal tool Han 1A/D-Sub

for D-Sub crimp contact, Han® 1A

PAPEL DE PULIDO FOC

for POF grain size 1000

Sechskant Kugelkopfschraubendreher

for InduCom hoods with hexagonal screws, With ball end

Torque Driver set f. guiding pins/bushes

for guiding pins and bushes, Tightening torque: 0.5 Nm, incl. 1/4in Bit

M12-Torque key SW17 (0,6Nm)

for M12-LWrench size: 17

Hexagonal screwdriver SW5-for 200A+350A

With grip, for axial screwWrench size: 5

hexagonal wrench adapter SW4

Adapter 3/8in, for axial screwWrench size: 4

Screwdriver Set Han VDE

The standard set

har-flexicon screw driver, 2.0 x 40

2.0 x 40

hexagonal wrench adapter SW5

Adapter 3/8in, for axial screwWrench size: 5

ADAPTADOR DE PULIDO FOC

POF cable 2.2 mm diameter

Torque Set HC SW 4/5

for High Current axial screw contact, incl. reversing blade (AF 4.0 + AF 5.0), Tightening torque: 5 ... 14 Nm

M12-Torque key SW13 (0,6Nm)

for M12-SWrench size: 13

Screw Driver Set Slimline

Insolated blade for slim assembly

hexagonal wrench adapter SW8

Adapter 3/8in, for axial screwWrench size: 8

assembly- disassembly tool

Han® EasyCon, for assembly and disassembly of shielding clamps

M8 Assembley Key SW9 (0,4 Nm)

for M8Wrench size: 9

Torque Driver Han 3A, 4A, Q5/0, Staf

Han® 3 A, Han® 3 A Push-In, Han® Q 5/0, Staf®

Torque Set Power Han Screw E/A/Fixing

for HARTING screw contacts and fixing screws, Tightening torque: 0.5 ... 1.2 Nm

HERRAMIENTA DE PULIDO FOC DIN 41626

DIN 41612

har-flexicon screw driver, 1.5 x 40

1.5 x 40

7/8"-Torque key SW22 (1,5Nm)

for 7/8"Wrench size: 22

replacement sleeve for tool 09990000847

for part number 09 99 000 0847

PAPEL LIJA GI 1 MICRA

for GI 1 μ-grain size

KIT POF 2 FOC

With measuring device

Polish tool for SC

SC

PAPEL LIJA 9 MICRAS

for GI 9 μ-grain size

Herramienta de pulir FH-ST

F-ST

Polierset HP duplex

Assembly Tool Han F+B cable gland

Han® F+B, Cable gland

PUSH PULL POWER Contact Insertion Tool

HARTING PushPull (V4) Power, for an easy insertion of male and female contacts into the insulation body

PLACA INF.MONTAJE CAP BLINDADA

for assembly of D-Sub hoods, Bottom part

UTIL DESMONTAR CTOS MACHOS DIN

DIN 41612, Insertion tool for coding pin

UTIL

DIN 41612, for breaking out the coding area

KIT HERRAMIENTAS FOC PARA FIBRA 50/125

Only measuring device

Montagewerkzeug f. Crimpflansche 50 pol

for flange, for D-Sub hoods (50 contacts)

Montagewerkzeug f. Crimpflansche 9-37pol

for flange, for D-Sub hoods (9-37 contacts)

ix Industrial assembly tool

for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

Insertion and repair tool cont. Har-Bus

har-bus® HM, Insertion tool for single male press-in contacts

har-bus HM. Tool kit shroud removal

for har-bus® HM shrouds

har-port assembly tool

To tighten the har-port fixing nut

M12-ACC-TORQUE WRENCH SW18

for M12 PowerWrench size: 18

M8-ACC-TORQUE WRENCH SW13

for M8Wrench size: 13

har-modular assembling aid

ix Industrial handtool insert 2

for ix Industrial® assembly tool, for angled variant, for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

ix Industrial handtool frame

ix Industrial handtool insert 1

for ix Industrial® assembly tool, for straight variant, for HARTING ix Industrial® and HARTING Mini PushPull ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

Insertion Tool Han-Mod f. single modules

Han-Modular®, for single modules

Polish tool for ferrule

Ferrule

Polish tool for SC POF

SC POF

Tool for single pole size 1&2

For SP1 and SP2Wrench size: 46

One Click Cleaner 2,5 mm

2.5 mm

One Click Cleaner 1,25 mm

1.25 mm

har-modular assem. aid for 2-row-coupler

for distance fixing brackets

ix Industrial assembly positioner

for HARTING ix Industrial® IP20 PushPull and Mini PushPull ix Industrial® for positioning the cable guides on the IDC unit. Required for the assembly of AWG 22 variants.

har-flex assembly tool, IDC to board

for har-flex® Board IDC