Tools

Cutting / stripping insulation

Products 491

Removal Tool Han D

Article No.: 09 99 000 0012

Han D®

Removal tool

Removal Tool Han E

Article No.: 09 99 000 0319

Han E®

Removal tool

Removal Tool, Han D, Mini

Article No.: 09 99 000 0052

Han D®, Service

Replacement-tip

REPLACEMENT TIP. REMOVAL TOOL

Article No.: 09 99 000 0004

for part number 09 99 000 0012

Removal tool

DIN41612 REMOVAL TOOL

Article No.: 09 99 000 0087

for contacts FC 1, FC 2 and FC 3

Service crimping tool

Han CRIMP TOOL WITH LOCATOR

Article No.: 09 99 000 0021

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²Conductor cross-section: 0.14 ... 2.5 mm²

Insertion / removal tools

DSUB INSERTION-REMOVAL-TOOL

Article No.: 09 99 000 0171

for single D-Sub standard contacts

Removal tool

Removal Tool Han C 1,5-6 mm²

Article No.: 09 99 000 0305

Han® CConductor cross-section: 1.5 ... 6 mm²

Hand crimping tool

Han Hand Crimp Tool

Article No.: 09 99 000 0110

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Assembly tool

Insertion Tool, Han

Article No.: 09 99 000 0059

for crimp contacts

Insertion / removal tools

Insertion/Removal Tool D-Sub

Article No.: 09 99 000 0368

Han-Modular®, for D-Sub crimp contact

Removal tool

DIN-Tool Demontage Crimp BC

Article No.: 09 99 000 0101

for contacts BC / har-bus® 64

Insert blocks

INSERT BLOCK TYPE R

Article No.: 09 99 000 0277

for use with male connectors, Type R

Insertion / removal tools

D SUB HD INSERTION EXTRACTION TOOL

Article No.: 09 99 000 0513

for single D-Sub high density contacts

Crimping tool

Double-Indent Crimping Tool

Article No.: 09 99 000 0888

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

Assembly tool

Mounting tool Han D/E/Yellock

Article No.: 09 99 000 0847

for crimp contacts, Small cross-section, Variable length of blade, Han D®, Han E®, Han-Yellock®

Hand crimping tool

Crimping Tool Han C 4/6/10 mm2

Article No.: 09 99 000 0377

Han® C: 4 ... 10 mm²Conductor cross-section: 4 ... 10 mm²

Removal tool

Removal Tool Han C 10mm²

Article No.: 09 99 000 0381

Han® CConductor cross-section: 10 mm²

Removal tool

Removal tool Han-Modular plastic frame

Article No.: 09 99 000 0331

for all Han-Modular® modules in plastic frames

Hand crimping tool

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

Article No.: 09 99 000 0501

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

Insertion / removal tools

D SUB MIXED INSERTION EXTRACTION TOOL SI

Article No.: 09 99 000 0511

for D-Sub mixed

Locator

Locator D-Sub turned standard contacts

Article No.: 09 99 000 0531

for single D-Sub standard contacts

Hand crimping tool

basic hand crimp tool BC/FC/har-bus64

Article No.: 09 99 000 0620

for individual DIN 41612 contacts, BC / FC / har-bus® 64

Assembly tool

DIN-TOOL MONTAGE CRIMP FC

Article No.: 09 99 000 0088

DIN 41612, for contacts FC 1, FC 2 and FC 3

Crimping insert

crimp set FC 3

Article No.: 09 99 000 0623

for individual contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts

Hexagonal scewdriver

Hexagonal Screw Driver SW 2

Article No.: 09 99 000 0313

for axial screw, With grip, 40 A contactWrench size: 2

Assembly tool

preLink Assembly tool

Article No.: 20 82 000 9901

for preLink® termination block

Hand crimping tool

SUB-D CRIMP TOOL SINGLE CONTACT

Article No.: 09 99 000 0175

for single stamped D-Sub contactConductor cross-section: 0.09 ... 0.56 mm²

Assembly tool

Removal Tool f. Han ES

Article No.: 09 99 000 0367

for Han® ES insert

Crimping insert

Crimp set BC/FC1/har-bus 64

Article No.: 09 99 000 0621

for individual contacts, BC / FC 1 / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts

Hexagonal driver

hexagonal wrench adapter SW2

Article No.: 09 99 000 0369

Bit ¼in, 40 A contact, for axial screwWrench size: 2

Removal tool

Removal Tool for contact in multi

Article No.: 09 99 000 0328

for contacts in the multi module

Assembly tool

DIN-Tool Montage Crimp BC

Article No.: 09 99 000 0100

DIN 41612, for contacts BC / har-bus® 64

Removal tool

DIN-Tool removal for contacts M

Article No.: 09 99 000 0174

for type M, incl. removal jacket, for contact replacement in male and female connectors

Bit ¼in as a spare part for guiding pins and bushes

Single Bit guiding pins/bushes

Article No.: 09 99 000 0841

Removal tool

D SUB MIXED EXTRACTION TOOL POWER COAX H

Article No.: 09 99 000 0512

for coaxial, pneumatic, power and high voltage contacts, for D-Sub mixed

Crimping insert

crimp set FC 2

Article No.: 09 99 000 0622

for individual contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts

Removal tool

Removal tool Han® pneumatic module metal

Article No.: 09 99 000 0899

for pneumatic contacts

Dynamometric screwdriver

M12 dynamometric screwdriver SW15

Article No.: 09 99 000 0646

for M12 Slim DesignWrench size: 15

Removal tool

Removal Tool Han-Mod f. single modules

Article No.: 09 99 000 0828

Han-Modular®, Han-Eco®, Han-Yellock®, for single modules, Metal

Hexagonal driver

Hexagonal Wrench Adapter SW2,5

Article No.: 09 99 000 0375

Bit ¼in, 70 A contact, for axial screwWrench size: 2.5

Removal tool

preLink unlocking tool 1=5

Article No.: 20 82 000 9916

for opening of theHARTING RJ Industrial® cable jacks

Removal tool

Removal Tool Han-Mod 100A Crimp

Article No.: 09 99 000 0383

for the Han® 100 A crimp module

Insert blocks

PLASTIC INSERT

Article No.: 09 99 000 0275

for use with male connectors, Type Q

Torque set

Torque Set Power Contacts SW2,5/2/PH2

Article No.: 09 99 000 0834

for power contact, incl. reversing blade (AF 2.0 + AF 2.5 + PH2), + different bits, + adapter blade, Tightening torque: 1 ... 5 Nm

Check gauge

Go / no-go gauge for 09990000888

Article No.: 09 99 000 0889

for crimping tool 09 99 000 0888, for optional testing

Replacement-tip

DIN-Tool Ersatzhülse M

Article No.: 09 99 000 0243

DIN 41612, for removal tool 09 99 000 0174

Locator

DIN-Tool Positionierer FC

Article No.: 09 99 000 0631

FC, for part number 09 99 000 0620

New

Insertion / removal tools

insertion/removal tool Han 1A/D-Sub

Article No.: 09 99 000 0809

for D-Sub crimp contact, Han® 1A

Hand crimping tool

D SUB HD SERVICE CRIMP TOOL

Article No.: 09 99 000 0596

Hand crimping tool

Crimptool Opening

Article No.: 09 99 000 0647

for crimp barrel and crimp flange

Crimp die

Crimp die 16mm² for 60 kN tool

Article No.: 09 99 000 0853

for 60 kN toolConductor cross-section: 16 mm²

Crimp die

Crimp die 10mm² for 60 kN tool

Article No.: 09 99 000 0852

for 60 kN toolConductor cross-section: 10 mm²

Removal tool

Han Yellock Removal Tool Plastic

Article No.: 11 99 000 0001

for Han-Yellock® modules and frames, Thermoplastic

Locator

Locator Set Han D/E/C, for Crimping tool

Article No.: 09 99 000 0376

Spare part, Han D®, Han E®, Han® C

Removal tool

HPP V4 Power contact removal tool

Article No.: 09 46 800 0098

HARTING PushPull (V4) Power, for an easy extraction of the male and female crimp contacts out of the insulation body

Crimp die

Crimp die 25mm² for 60 kN tool

Article No.: 09 99 000 0854

for 60 kN toolConductor cross-section: 25 mm²

Polishing paper

POLISH PAPER FOR POF GRAIN SIZE 1

Article No.: 20 80 001 9911

for POF grain size 1000

Hexagonal head screwdriver

Ball end hexagonal screwdriver SW2.5x100

Article No.: 61 03 600 0021

for InduCom hoods with hexagonal screws, With ball end

Crimp die

Crimp die 35mm² for 60 kN tool

Article No.: 09 99 000 0855

for 60 kN toolConductor cross-section: 35 mm²

Torque set

Torque driver set for guide pins/bushing

Article No.: 09 99 000 0840

for guiding pins and bushes, Tightening torque: 0.5 Nm, incl. 1/4in Bit

Hand hydraulic crimping tool

Hand hydraulic crimping tool 60 kN

Article No.: 09 99 000 0851

Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mmConductor cross-section: 10 ... 70 mm²

Locator

Locator f. crimping-tool 09990000888

Article No.: 09 99 000 0887

Spare part, for crimping tool 09 99 000 0888

Dynamometric screwdriver

M12-TORQUE KEY SW17 (0,6Nm)

Article No.: 09 99 000 0384

for M12-LWrench size: 17

Hexagonal driver

Hexagonal screwdriver SW5-for 200A+350A

Article No.: 09 99 000 0364

With grip, for axial screwWrench size: 5

Removal tool

Removal Tool Han-Mod 200A Crimp

Article No.: 09 99 000 0820

for the Han® 200 A crimp module

Hexagonal driver

hexagonal wrench adapter SW4

Article No.: 09 99 000 0370

Adapter 3/8in, for axial screwWrench size: 4

Hand crimping tool

DSUB HAND CRIMP TOOL POWER CONTACT

Article No.: 09 99 000 0509

for power contactsConductor cross-section: 0.5 ... 6 mm²

Locator

DIN-Tool Positionierer BC

Article No.: 09 99 000 0630

BC / har-bus® 64, for part number 09 99 000 0620

Han® VDE Screw Driver Set

Screwdriver Set Han VDE

Article No.: 09 99 000 0836

The standard set

Removal tool

Removal tool for Han Quintax

Article No.: 09 99 000 0323

Han-Quintax®, for Quintax contact

Locator

Locator D-Sub für. 0501 (Gigabit Modul )

Article No.: 09 99 000 0897

for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476

Screw driver

har-flexicon screw driver, 2.0 x 40

Article No.: 14 99 000 0001

2.0 x 40

Removal tool

Han-Fast Lock Unlocking Tool

Article No.: 09 99 000 0837

Han-Fast® Lock, for easier removal of the Fast-Lock contact from the printed circuit board

Hexagonal driver

hexagonal wrench adapter SW5

Article No.: 09 99 000 0371

Adapter 3/8in, for axial screwWrench size: 5

Hand crimping tool

DSUB HAND TOOLS

Article No.: 09 99 000 0169

for 500 bandoliered standard contactsConductor cross-section: 0.09 ... 0.56 mm²

Locator

Han Yellock Locator for 0021 tool

Article No.: 09 99 000 0343

Han-Yellock®

Polishing tool

POLISH TOOL FOR 2.2MM POF CABLE

Article No.: 20 99 000 1093

POF cable 2.2 mm diameter

Removal tool

Removal Tool Han-Mod f. double modules

Article No.: 09 99 000 0842

Han-Modular®, for double modules

Removal tool

Removal Tool Han-Mod 100A Single Module

Article No.: 09 99 000 0827

for the Han® 100 A single module, for Han® GND

Crimp die

Crimp die 50mm² for 60 kN tool

Article No.: 09 99 000 0856

for 60 kN toolConductor cross-section: 50 mm²

Removal tool

Removal Tool LC contacts

Article No.: 09 99 000 0843

for LC contact in the Han® LC module

Removal tool

Removal Tool Han HC250-M/F

Article No.: 09 99 000 0332

for Han® HC Modular 250 Crimp, for unlocking the fixing plate

Removal tool

Han Yellock Removal Tool Metal

Article No.: 11 99 000 0002

for Han-Yellock® modules and frames, Metal

New

Battery crimping tool set

Battery Crimping Tool Set

Article No.: 09 99 000 0990

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Hand crimping tool

CRIMPING TOOL

Article No.: 09 99 000 0120

for 250 bandoliered contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping tool

Crimping tool for 1mm POF

Article No.: 20 99 000 1035

for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST

Torque set

Torque Set HC SW 4/5

Article No.: 09 99 000 0833

for High Current axial screw contact, incl. reversing blade (AF 4.0 + AF 5.0), Tightening torque: 5 ... 14 Nm

Hand crimping tool

DIN-Tool Crimptool Coax M

Article No.: 09 99 000 0194

Crimp die included, for coaxial contact, acc. to DIN 41626

Dynamometric screwdriver

M12-Torque key SW13 (0,6Nm)

Article No.: 09 99 000 0382

for M12-SWrench size: 13

Removal tool

Removal Tool Han HV Double Module 5kV

Article No.: 09 99 000 0327

for the Han® HV Double module

Replacement-tip

REMOVAL JACKET

Article No.: 09 99 000 0320

DIN 41612, for removal tool 09 99 000 0174

Battery hydraulic tool

Battery hydraulic crimping tool 60 kN

Article No.: 09 99 000 0850

Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mmConductor cross-section: 10 ... 70 mm²

Hand crimping tool

GDS A-B/C CRIMPING TOOL ON REEL

Article No.: 09 99 000 0248

for 500 bandoliered contacts, BC / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm²

Crimp die

Crimp die 25mm² for 120 kN tool

Article No.: 09 99 000 0864

for 120 kN toolConductor cross-section: 25 mm²

Crimp die

Crimp die 16mm² for 120 kN tool

Article No.: 09 99 000 0863

for 120 kN toolConductor cross-section: 16 mm²

Hand crimping tool

Ferrule Crimp tool 10mm2

Article No.: 09 99 000 0374

for wire end ferrulesConductor cross-section: 10 mm²

Crimp die

Crimp die 70mm² for 60 kN tool

Article No.: 09 99 000 0857

for 60 kN toolConductor cross-section: 70 mm²

Crimp die

Crimp die 10mm² for 120 kN tool

Article No.: 09 99 000 0862

for 120 kN toolConductor cross-section: 10 mm²

New

Removal tool

Removal Tool Han-Modular Flexbox

Article No.: 09 99 000 0979

Han-Modular® Flexbox

Locator

Han Yellock Locator for 0110 tool

Article No.: 09 99 000 0341

Han-Yellock®

Crimp die

Crimp die 70mm² for 120 kN tool

Article No.: 09 99 000 0867

for 120 kN toolConductor cross-section: 70 mm²

Service case

case for crimping tool

Article No.: 09 99 000 0632

for crimping tool and 5 sets inserts, incl. screwdriver for insert change, without contents

New

Removal tool

Removal tool pneumatic module metal 8/10

Article No.: 09 99 000 0999

for pneumatic contacts metal 8/10

Crimp die

Crimp die 35mm² for 120 kN tool

Article No.: 09 99 000 0865

for 120 kN toolConductor cross-section: 35 mm²

Removal tool

SEK-18 REMOVAL-TOOL

Article No.: 09 99 000 0133

for male contacts of styles SEK and DIN Signal

Punching units

Han 3A Punching unit

Article No.: 09 99 000 0907

for hydraulic punch drivers03 A

Bench press

SEK BENCH-PRESS

Article No.: 09 99 000 0114

for termination of insulation displacement connectors, Suitable for D-Sub and SEK

Punching units

Han 6B / Han-Eco 6B Punching unit

Article No.: 09 99 000 0902

for hydraulic punch drivers06 B

Removal tool

Removal Tool Han HV Single Module 2,5kV

Article No.: 09 99 000 0335

for the Han® HV Single module

Insert blocks

DIN-Tool PLASTIC INSERT 3R

Article No.: 09 99 000 0264

for use with male connectors, Type 3R

Hand crimping tool

DSUB HAND CRIMP TOOL OUTER COAX CONT.

Article No.: 09 99 000 0503

for coaxial contact, acc. to DIN 41626, for outer ferrule

Crimp die

Crimp die 50mm² for 120 kN tool

Article No.: 09 99 000 0866

for 120 kN toolConductor cross-section: 50 mm²

Insert blocks

PLASTIC INSERT

Article No.: 09 99 000 0276

for use with male connectors, Type 2R

Crimp die

D-Sub DIE OUTER COAX CONTACT

Article No.: 09 99 000 0508

for D-Sub

Locator

Locator Han-Yellock 20A f. 0001

Article No.: 09 99 000 0342

Han-Yellock®

Screw driver set Slimline

Screw Driver Set Slimline

Article No.: 09 99 000 0844

Insolated blade for slim assembly

Crimp die

Crimp die 95mm² for 120 kN tool

Article No.: 09 99 000 0868

for 120 kN toolConductor cross-section: 95 mm²

Hexagonal driver

hexagonal wrench adapter SW8

Article No.: 09 99 000 0372

Adapter 3/8in, for axial screwWrench size: 8

Hand crimping tool

DIN-Tool Crimpzange FC2

Article No.: 09 99 000 0119

for 250 bandoliered contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm²

Removal tool

Removal tool Han MegaBit Module

Article No.: 09 99 000 0880

Han® Megabit module

Crimp die

Crimp die 120mm² for 120 kN tool

Article No.: 09 99 000 0869

for 120 kN toolConductor cross-section: 120 mm²

Punching units

Han 16B / Han-Eco 16B Punching unit

Article No.: 09 99 000 0904

for hydraulic punch drivers16 B

Hand crimping tool

Crimping tool Han-Fast Lock 4-10mm²

Article No.: 09 99 000 0831

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 4 ... 10 mm²

Hand crimping tool

CRIMPING TOOL FOR POF

Article No.: 20 99 000 1033

for FO connector (plastic fibre), SC, F-SMA F-ST

Hand crimping tool

Crimping tool for glass fibre

Article No.: 20 99 000 1031

for FO connector (glass fibre), SC, F-SMA F-ST

New

Crimp die

Set Han C (4-10 mm²) f. 0990

Article No.: 09 99 000 0995

for part number 09 99 000 0990, Han® C: 4 ... 10 mm², incl. locator

Punching units

Han 24B / Han-Eco 24B Punching unit

Article No.: 09 99 000 0905

for hydraulic punch drivers24 B

Hydraulic hand punch driver

Hand Hydraulic Punch Driver

Article No.: 09 99 000 0901

To produce panel cut outs for connectors, Punching pressure: 60 kN

Removal tool

assembly- disassembly tool

Article No.: 09 99 000 0334

Han® EasyCon, for assembly and disassembly of shielding clamps

Locator

Locator Han P f. 0001

Article No.: 09 99 000 0329

Han® PConductor cross-section: 0.5 ... 2.5 mm²

Locator

Locator Han P Contact

Article No.: 09 99 000 0886

for crimping tool 09 99 000 0888

Battery hydraulic tool

Battery hydraulic crimping tool 120kN

Article No.: 09 99 000 0860

Pressing force 120 kN, Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mmConductor cross-section: 10 ... 240 mm²

Dynamometric screwdriver

M8 Assembley Key SW9 (0,4 Nm)

Article No.: 09 99 000 0380

for M8Wrench size: 9

Crimp die

Crimp die 150mm² for 120 kN tool

Article No.: 09 99 000 0870

for 120 kN toolConductor cross-section: 150 mm²

Crimping machine TK-M

crimping machine TK-M

Article No.: 09 98 000 6900

Basic machine without interchangeable unit

Punching units

Han 16A / Han-Eco 16A Punching unit

Article No.: 09 99 000 0909

for hydraulic punch drivers16 A

Hand crimping tool

Crimping tool Han-Fast Lock 1.5/2.5 mm²

Article No.: 09 99 000 0876

Angled, for Han-Fast® Lock single contactConductor cross-section: 1.5 ... 2.5 mm²

Torque tool

Torque Driver Han 3A, 4A, Q5/0, Staf

Article No.: 09 99 000 0875

Han® 3 A, Han® 3 A Push-In, Han® Q 5/0, Staf®

Insert blocks

PLASTIC INSERT

Article No.: 09 99 000 0274

for use with male connectors, Type 2Q

Cabling tool for termination

SEK-18 BASE PLATE

Article No.: 09 99 000 0115

for discrete wire termination, Suitable for SEK female

Punching units

Han 10B / Han-Eco 10B Punching unit

Article No.: 09 99 000 0903

for hydraulic punch drivers10 B

New

Hand crimping tool

Crimping Tool Han HsB 1.5/2.5/4 mm²

Article No.: 09 99 000 0986

Han® HsB: 1.5 ... 4 mm²Conductor cross-section: 1.5 ... 4 mm²

New

Locator

Locator Han HsB 4/6/10 mm² f. 0377

Article No.: 09 99 000 0985

for part number 09 99 000 0377, Han® HsB: 4 ... 10 mm²

Hand crimping tool

Crimping Tool Han-Fast Lock 1.5/2.5mm²

Article No.: 09 99 000 0881

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 1.5 ... 2.5 mm²

Torque set

Torque Set Power Han Screw E/A/Fixing

Article No.: 09 99 000 0835

for HARTING screw contacts and fixing screws, Tightening torque: 0.5 ... 1.2 Nm

Punching units

Han 10A / Han-Eco 10A Punching unit

Article No.: 09 99 000 0908

for hydraulic punch drivers10 A

Crimp die

Crimp die 240mm² for 120 kN tool

Article No.: 09 99 000 0872

for 120 kN toolConductor cross-section: 240 mm²

Insert blocks

DIN-Tool PLASTIC INSERT 3Q

Article No.: 09 99 000 0263

for use with male connectors, Type 3Q

New

Locator

Locator Han D f. 0990

Article No.: 09 99 000 0991

Spare part, Han D®, for part number 09 99 000 0990Conductor cross-section: 0.14 ... 1.5 mm²

Pliers

REMOVAL TOOL FOR SINGLE MALE CONTACTS

Article No.: 09 99 000 0239

To remove single male contacts

Hand crimping tool

Crimping tool Han-Fast Lock 4-10mm² angl

Article No.: 09 99 000 0877

Angled, for Han-Fast® Lock single contactConductor cross-section: 4 ... 10 mm²

Crimp die

Crimp die 185mm² for 120 kN tool

Article No.: 09 99 000 0871

for 120 kN toolConductor cross-section: 185 mm²

Interchangeable unit

Interchangeable unit TK-M for Han E

Article No.: 09 98 000 6902

Han E®Conductor cross-section: 0.14 ... 4 mm²

Interchangeable unit

Interchangeable units for Han D

Article No.: 09 98 000 6901

Han D®Conductor cross-section: 0.14 ... 2.5 mm²

Polishing tool

Polish tool for DIN 41626

Article No.: 20 99 000 1092

DIN 41612

Hand crimping tool

DSUB HAND CRIMP TOOL SIGNAL CON.W.P

Article No.: 09 99 000 0505

for signal contacts

Hand crimping tool

D SUB HD CR. TOOL F.500 PCS REEL- CS 20

Article No.: 09 99 000 0597

for 500 bandoliered D-Sub high density contacts

Removal tool

Removal tool Han F+B

Article No.: 09 99 000 0878

Han® F+B, for circular inserts

Screw driver

har-flexicon screw driver, 1.5 x 40

Article No.: 14 99 000 0002

1.5 x 40

New

Locator

Locator Han E f. 0990

Article No.: 09 99 000 0992

Spare part, Han E®, for part number 09 99 000 0990Conductor cross-section: 0.5 ... 4 mm²

Bench press

HAND BENCH PRESS 15kN

Article No.: 09 99 000 0201

Locator

Locator-Set Han E / Han D

Article No.: 09 99 000 0022

Spare part, Han D®, Han E®

Dynamometric screwdriver

7/8"-Torque key SW22 (1,5Nm)

Article No.: 09 99 000 0395

for 7/8"Wrench size: 22

Top tool

TOP TOOL FOR D-SUB PRESS-IN

Article No.: 09 99 000 0197

for use with female connectors, Type B, 2B, 3B, C, 2C, 3C

Hand crimping tool

Ferrule crimp tool 16 / 25qmm

Article No.: 09 99 000 0830

for wire end ferrulesConductor cross-section: 16 ... 25 mm²

Punching units

Han 1A Punching Unit

Article No.: 09 99 000 0976

for hydraulic punch drivers1 A

New

Removal tool

Removal tool UIC 558

Article No.: 09 99 000 0968

HARTING UIC 558

Battery hydraulic punch driver

Battery Hydraulic Punch Driver

Article No.: 09 99 000 0900

To produce panel cut outs for connectors, Punching pressure: 60 kN

Interchangeable unit

Interchangeable unit TK-M for Han C

Article No.: 09 98 000 6903

Han® CConductor cross-section: 1.5 ... 6 mm²

Replacement-tip

Replacement sleeve for 09990000847

Article No.: 09 99 000 0848

for part number 09 99 000 0847

Punching units

Han-Eco 24B Punching unit f. rear assy.

Article No.: 09 99 000 0919

for hydraulic punch drivers24 B

Punching units

Han-Eco 6B Punching unit f. rear assy.

Article No.: 09 99 000 0916

for hydraulic punch drivers06 B

Base plate

PRESS-IN BASE PLATE

Article No.: 09 99 000 0255

for guide frame, for SEK and D-Sub

New

Hand crimping tool

Hand crimping tool UIC 558

Article No.: 09 99 000 0967

HARTING UIC 558: 0.75 ... 1 mm²Conductor cross-section: 0.75 ... 1 mm²

New

Hand crimping tool

Crimping Set FC3

Article No.: 09 99 000 0773

for individual DIN 41612 contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping insert

Crimping set for solid BC,har-bus 64

Article No.: 09 99 000 0629

for individual contacts, BC / har-bus® 64Conductor cross-section: 0.13 mm² for BC contacts

Adapter

DIN-Tool prolongation-die

Article No.: 09 99 000 0279

Suitable for 09 99 000 0282 and all CPM machines, for height compensation

Hand crimping tool

DIN-Tool Crimpzange Rolle FC1

Article No.: 09 99 000 0247

for 250 bandoliered contacts, FC 1Conductor cross-section: 0.09 ... 0.25 mm²

Bottom tool

DIN-Tool Aufnahmeblock universal

Article No.: 09 99 000 0185

Universal, for use with male and female connectors, Type B, 2B, 3B, C, 2C, 3C, M, Q, 2Q, 3Q, R, 2R, 3R, E, F, H, har-bus® 64

Cabling tool for termination

SEK-19 BASE PLATE 4R

Article No.: 09 99 000 0130

for discrete wire termination, Suitable for SEK LP, 4 rows

Interchangeable unit

Interchangeable unit TK-M for D-Sub

Article No.: 09 98 000 6904

D-SubConductor cross-section: 0.09 ... 0.82 mm²

Quick change tool

quick change tool BK for D-Sub large

Article No.: 09 98 000 3010

D-SubConductor cross-section: 0.25 ... 0.5 mm²

Quick change tool

quick change tool BK for D Sub small

Article No.: 09 98 000 3008

D-SubConductor cross-section: 0.09 ... 0.25 mm²

Locator

Locator Han C 4/6/10mm2 f. ...0377

Article No.: 09 99 000 0963

Spare part, for part number 09 99 000 0377, Han® C: 4 ... 10 mm²

Punching units

Han-Eco 10B Punching unit f. rear assy.

Article No.: 09 99 000 0917

for hydraulic punch drivers10 B

Punching units

Han-Compact Punching unit

Article No.: 09 99 000 0911

for hydraulic punch driversHan-Compact®

New

Hand crimping tool

Crimping Set FC2

Article No.: 09 99 000 0772

for individual DIN 41612 contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm²

New

Hand crimping tool

Crimping Set BC

Article No.: 09 99 000 0770

for individual DIN 41612 contacts, BCConductor cross-section: 0.09 ... 0.5 mm²

Top tool

HAR-PRESS TOP TOOL

Article No.: 09 99 000 0221

for use with female connectors, Type E, F, H

Crimping machine BK

crimping machine BK

Article No.: 09 98 000 5000

Polishing paper

Polish paper for glass fibre, gra in siz

Article No.: 20 80 001 9913

for GI 1 μ-grain size

Tool-kit

TOOL KIT POF 2

Article No.: 20 99 000 3013

With measuring device

New

Locator

Locator Han C f. 0990

Article No.: 09 99 000 0993

Spare part, Han® C, for part number 09 99 000 0990Conductor cross-section: 1.5 ... 4 mm²

Punching units

Han-Eco 16B Punching unit f. rear assy.

Article No.: 09 99 000 0918

for hydraulic punch drivers16 B

Punching units

Han-Eco 16A Punching unit f. rear assy.

Article No.: 09 99 000 0915

for hydraulic punch drivers16 A

Punching units

Han-Eco 10A Punching unit f. rear assy.

Article No.: 09 99 000 0914

for hydraulic punch drivers10 A

Punching units

Han 3HPR Punching unit

Article No.: 09 99 000 0906

for hydraulic punch drivers3 HPR

Top tool

press in stamp M (24+8)

Article No.: 09 99 000 0269

for use with female connectors, Type M (24+8)

Bottom tool

HAR-PRESS BOTTOM TOOL, narrow

Article No.: 09 99 000 0256

Narrow, for use with male connectors, Type B, 2B, 3B, C, 2C, 3C, M, F, H, Type Q, 2Q, 3Q, R, 2R, 3R

Press-out tool

REMOVAL PRESS TOOL 5.5MM SPILL

Article No.: 09 99 000 0220

for termination length 4.5 ... 5.3 mm

Cabling tool for termination

SEK-18 BASE PLATE 2R

Article No.: 09 99 000 0131

for discrete wire termination, Suitable for SEK LP, 2 rows

Crimping machine TC-C01

crimping machine TC-C01 for Han C

Article No.: 09 98 000 9003

for Han® C contactConductor cross-section: 1.5 ... 10 mm²

Crimping machine TC-C01

crimping machine TC-C01 for Han D

Article No.: 09 98 000 9001

for Han D® contactConductor cross-section: 0.14 ... 2.5 mm²

Locator

M12 power locator

Article No.: 09 99 000 0638

for part number 09 99 000 0509

Polishing tool

Polish tool for SC

Article No.: 20 99 000 1097

SC

Punching units

Han-Yellock 60 panel punch

Article No.: 11 99 600 0001

for hydraulic punch driversHan-Yellock® 60

Punching units

Han-Mod Com. Punching unit

Article No.: 09 99 000 0912

for hydraulic punch driversModular Compact

Punching units

Han-Yellock 10 Punching unit

Article No.: 09 99 000 0910

for hydraulic punch driversHan-Yellock® 10

Top tool

HARPRESS SEK MODULAR INSERT TOOL

Article No.: 09 99 000 0540

for SEK male low-profile connectors, 40 poles, Modular insert

Top tool

HARPRESS SEK MODULAR INSERT TOOL

Article No.: 09 99 000 0534

for SEK male low-profile connectors, 34 poles, Modular insert

Top tool

SEK-18 INSERT-TOOL MA LP PR-IN 20P

Article No.: 09 99 000 0520

for SEK male low-profile connectors, 20 poles, Modular insert

Top tool

SEK-18 INSERT-TOOL MA LP PR-IN 16P

Article No.: 09 99 000 0516

for SEK male low-profile connectors, 16 poles, Modular insert

Top tool

SEK-18 INSERT-TOOL MA LP PR-IN 14P

Article No.: 09 99 000 0514

for SEK male low-profile connectors, 14 poles, Modular insert

Pneumatic press

PNEUMATIC PRESS 40KN

Article No.: 09 99 000 0282

40 kN

Top tool

Top Tool M (60+4)

Article No.: 09 99 000 0271

for use with female connectors, Type M (60+4)

Support block

SUPPORT BLOCK

Article No.: 09 99 000 0218

for contact replacement in male and female connectors, for male connectors of types Q, 2Q, 3Q, R, 2R, 3R, for female connectors of types B, 2B, 3B, C, 2C, 3C, F

Assembly tool

INSERTION TOOL

Article No.: 09 99 000 0200

DIN 41612, Insertion tool for single male press-in contacts

Top tool

DIN-Tool Einpressstempel R,2R

Article No.: 09 99 000 0183

for use with male connectors, Type R, 2R

Cabling tool for termination

SEK-17 BASE PLATE

Article No.: 09 99 000 0134

for discrete wire termination, Suitable for SEK DIP

Quick change tool

quick change tool BK for FC3

Article No.: 09 98 000 3007

FC 3Conductor cross-section: 0.5 ... 1.5 mm²

New

Removal tool

Removal Tool Han F+B -Pliers

Article No.: 09 99 000 0997

Han® F+B, for circular inserts

New

Removal tool

Removal Tool Han HsB

Article No.: 09 99 000 0987

Han® HsB

Locator

Locator Han E relay f. 0888

Article No.: 09 99 000 0978

Han E®, Relay contactsConductor cross-section: 0.14 ... 4 mm²

Removal tool

Removal Tool Han K6/6 Crimp

Article No.: 09 99 000 0977

Han® K 6/6

Polishing paper

Polish paper for glass fibre, gra in siz

Article No.: 20 80 001 9912

for GI 9 μ-grain size

Polishing tool

Polish tool for FH-ST

Article No.: 20 99 000 1095

F-ST

Polishing tool HP duplex

Polierset HP duplex

Article No.: 20 80 001 9914

New

Assembly tool

Assembly Tool Han F+B cable gland

Article No.: 09 99 000 0984

Han® F+B, Cable gland

Assembly tool

Mounting tool for flange - hood 50P

Article No.: 61 03 600 0018

for flange, for D-Sub hoods (50 contacts)

Assembly tool

Mounting tool for flange - hood 9-37P

Article No.: 61 03 600 0017

for flange, for D-Sub hoods (9-37 contacts)

Locator

Positionierer 0,5 mm D-Sub

Article No.: 61 03 600 0023

for M12 male contacts, 21 01 100 9020

Locator

Locator Han E relay f. 0001

Article No.: 09 99 000 0345

Han E®, Relay contactsConductor cross-section: 0.14 ... 4 mm²

Crimping insert

Crimp inserts 7,5 for tool 09990000647

Article No.: 09 99 000 0649

for part number 09 99 000 0647Wrench size: 7.5

Crimping insert

Crimp inserts 8,0 for tool 09990000647

Article No.: 09 99 000 0650

for part number 09 99 000 0647Wrench size: 8

Crimping insert

Crimp inserts 9,0 for tool 09990000647

Article No.: 09 99 000 0653

for part number 09 99 000 0647Wrench size: 9

Assembly tool

Mounting tool for crimp flange SLIM

Article No.: 09 99 000 0639

for flange

Crimping insert

Crimp inserts 6,5 for tool 09990000647

Article No.: 09 99 000 0652

for part number 09 99 000 0647Wrench size: 6.5

Removal tool

Removal tool Han C (one locking clip)

Article No.: 09 99 000 0315

Han® C module, 09 14 003 3001 / 09 14 003 3101, Han® Q 2/0, Han® Q 3/0, Han® Q 4/0 Crimp termination

Hand crimping tool

M23 Crimping tool for power contacts

Article No.: 09 99 000 0896

for M23 power contacts, for M23 signal contactsConductor cross-section: 0.14 ... 4 mm²

Hand crimping tool

M23 Crimping tool for shielding sleeve

Article No.: 09 99 000 0898

for shielded bushing

Hand crimping tool

Service Crimp Tool FC1-3

Article No.: 09 99 000 0656

for individual DIN 41612 contacts, for contacts FC 1, FC 2 and FC 3Conductor cross-section: 0.25 mm² for FC 1 contacts 0.25 ... 0.56 mm² for FC 2 contacts 0.75 ... 1.5 mm² for FC 3 contacts

Adjustment gauge

Adjustment Gauge Set 1.8/2.0/2.4/2.8

Article No.: 09 99 000 0975

for four-indent crimping tools

Test adapter set

1x Industrial FLUKE Testadapter-Set

Article No.: 09 45 800 0183

Type FLUKE Networks DSX-CHA-5-IX

Removal tool

ix Industrial Removal Tool

Article No.: 09 45 800 0182

for HARTING ix Industrial® as pull-out aid for close-fitting ix Industrial® connectors

Crimping insert

Crimp inserts 8,5 for tool 09990000647

Article No.: 09 99 000 0658

for part number 09 99 000 0647Wrench size: 8.5

Crimping insert

Crimp inserts 9,5 for tool 09990000647

Article No.: 09 99 000 0654

for part number 09 99 000 0647Wrench size: 9.5

Crimping insert

Crimp inserts 7,0 for tool 09990000647

Article No.: 09 99 000 0648

for part number 09 99 000 0647Wrench size: 7

Stripping blade set

Stripping Blade Set / straight

Article No.: 09 99 000 0981

Straight

Stripping blade set

Stripping Blade Set / oval / 10-16 mm²

Article No.: 09 99 000 0982

OvalConductor cross-section: 10 ... 16 mm²

Stripping tool

Stripping Tool 0,03-16,0 mm²

Article No.: 09 99 000 0980

Conductor cross-section: 0.03 ... 16 mm²

Stripping blade set

Stripping Blade Set/v-shape/0,14-2,5mm²

Article No.: 09 99 000 0983

V-shape

Assembly tool

ix Industrial assembly tool

Article No.: 09 45 800 0181

for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

Crimping insert

Crimp inserts 10,0 for tool 09990000647

Article No.: 09 99 000 0655

for part number 09 99 000 0647Wrench size: 10

Interchangeable unit

Interchangeable unit TK-M for Han P

Article No.: 09 98 000 6906

Han® PConductor cross-section: 0.5 ... 2.5 mm²

Interchangeable unit

Interchangeable unit TK-M for HanYellock

Article No.: 09 98 000 6907

Han-Yellock®Conductor cross-section: 0.14 ... 2.5 mm²

Assembly tool

har-port assembly tool

Article No.: 09 45 502 0007

To tighten the har-port fixing nut

Table fixing

Bench Mount f. 0314/0307

Article No.: 09 99 000 0309

for part number 09 99 000 0307 and 09 99 000 0314

Foot switch

Foot switch / Bench mount-Set

Article No.: 09 99 000 0347

for part number 09 99 000 0307 and 09 99 000 0314

Hand crimping tool

Ferrule crimping tool 4-16mm²

Article No.: 09 99 000 0971

for wire end ferrules, acc. to DIN 46228Conductor cross-section: 4 ... 16 mm²

Pneumatic crimping tool

Pneumatic Crimping Tool Set Han C/D/E

Article No.: 09 99 000 0314

Han D®: 0.14 ... 2.5 mm², Han E®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

New

Hand crimping tool

Ferrule crimping tool 0,14-2,5mm²

Article No.: 09 99 000 0970

for wire end ferrules, acc. to DIN 46228Conductor cross-section: 0.14 ... 2.5 mm²

Locator

M23 locator, Ethernet contact 0.6mm

Article No.: 09 99 000 0961

for 0.6 mm data contacts, for crimping tool 09 99 000 0890

New

Crimping insert

Crimp inserts 17,5 for tool 09990000647

Article No.: 09 99 000 0690

for part number 09 99 000 0647Wrench size: 17.5

New

Crimping insert

Crimp inserts 18,0 for tool 09990000647

Article No.: 09 99 000 0691

for part number 09 99 000 0647Wrench size: 18

New

Crimping insert

Crimp inserts 5,0 for tool 09990000647

Article No.: 09 99 000 0665

for part number 09 99 000 0647Wrench size: 5

New

Crimping insert

Crimp inserts 6,0 for tool 09990000647

Article No.: 09 99 000 0667

for part number 09 99 000 0647Wrench size: 6

New

Crimping insert

Crimp inserts 7,0 for tool 09990000647

Article No.: 09 99 000 0669

for part number 09 99 000 0647Wrench size: 7

New

Crimping insert

Crimp inserts 10,0 for tool 09990000647

Article No.: 09 99 000 0675

for part number 09 99 000 0647Wrench size: 10

New

Crimping insert

Crimp inserts 6,5 for tool 09990000647

Article No.: 09 99 000 0668

for part number 09 99 000 0647Wrench size: 6.5

New

Crimping insert

Crimp inserts 9,5 for tool 09990000647

Article No.: 09 99 000 0674

for part number 09 99 000 0647Wrench size: 9.5

New

Crimping insert

Crimp inserts 10,5 for tool 09990000647

Article No.: 09 99 000 0676

for part number 09 99 000 0647Wrench size: 10.5

New

Crimping insert

Crimp inserts 11,0 for tool 09990000647

Article No.: 09 99 000 0677

for part number 09 99 000 0647Wrench size: 11

New

Crimping insert

Crimp inserts 12,5 for tool 09990000647

Article No.: 09 99 000 0680

for part number 09 99 000 0647Wrench size: 12.5

New

Crimping insert

Crimp inserts 5,5 for tool 09990000647

Article No.: 09 99 000 0666

for part number 09 99 000 0647Wrench size: 5.5

New

Crimping insert

Crimp inserts 9,0 for tool 09990000647

Article No.: 09 99 000 0673

for part number 09 99 000 0647Wrench size: 9

New

Crimping insert

Crimp inserts 11,5 for tool 09990000647

Article No.: 09 99 000 0678

for part number 09 99 000 0647Wrench size: 11.5

New

Crimping insert

Crimp inserts 8,0 for tool 09990000647

Article No.: 09 99 000 0671

for part number 09 99 000 0647Wrench size: 8

New

Crimping insert

Crimp inserts 7,5 for tool 09990000647

Article No.: 09 99 000 0670

for part number 09 99 000 0647Wrench size: 7.5

New

Crimping insert

Crimp inserts 8,5 for tool 09990000647

Article No.: 09 99 000 0672

for part number 09 99 000 0647Wrench size: 8.5

New

Crimping insert

Crimp inserts 13,5 for tool 09990000647

Article No.: 09 99 000 0682

for part number 09 99 000 0647Wrench size: 13.5

New

Crimping insert

Crimp inserts 15,5 for tool 09990000647

Article No.: 09 99 000 0686

for part number 09 99 000 0647Wrench size: 15.5

New

Crimping insert

Crimp inserts 15,0 for tool 09990000647

Article No.: 09 99 000 0685

for part number 09 99 000 0647Wrench size: 15

New

Crimping insert

Crimp inserts 14,5 for tool 09990000647

Article No.: 09 99 000 0684

for part number 09 99 000 0647Wrench size: 14.5

New

Crimping insert

Crimp inserts 16,0 for tool 09990000647

Article No.: 09 99 000 0687

for part number 09 99 000 0647Wrench size: 16

New

Crimping insert

Crimp inserts 13,0 for tool 09990000647

Article No.: 09 99 000 0681

for part number 09 99 000 0647Wrench size: 13

New

Crimping insert

Crimp inserts 12,0 for tool 09990000647

Article No.: 09 99 000 0679

for part number 09 99 000 0647Wrench size: 12

New

Crimping insert

Crimp inserts 14,0 for tool 09990000647

Article No.: 09 99 000 0683

for part number 09 99 000 0647Wrench size: 14

New

Crimping insert

Crimp inserts 17,0 for tool 09990000647

Article No.: 09 99 000 0689

for part number 09 99 000 0647Wrench size: 17

New

Crimping insert

Crimp inserts 16,5 for tool 09990000647

Article No.: 09 99 000 0688

for part number 09 99 000 0647Wrench size: 16.5

New

Hand crimping tool

T1 Industrial crimp tool (AWG 28-26)

Article No.: 09 45 800 2810

for HARTING T1 Industrial contacts (AWG 28 ... AWG 26)

New

Hand crimping tool

T1 Industrial crimp tool (AWG 24-22)

Article No.: 09 45 800 2811

for HARTING T1 Industrial contacts (AWG 24 ... AWG 22)

New

Hand crimping tool

Crimping Set FC1

Article No.: 09 99 000 0771

for individual DIN 41612 contacts, FC 1Conductor cross-section: 0.09 ... 0.25 mm²

New

Assembly tool

har-modular assembling aid

Article No.: 02 09 500 0002

New

Pneumatic crimping tool

Pneum. crimping tool x501

Article No.: 09 99 000 0664

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

Removal tool

REMOVAL TOOL

Article No.: 09 99 000 0198

for moulding, for male connectors of types Q, 2Q, 3Q, R, 2R, 3R

Quick change tool

quick change tool BK for BC

Article No.: 09 98 000 3004

for BC contactsConductor cross-section: 0.09 ... 0.56 mm²

Cabling tool for termination

DIN-Tool Basisplate für IDC

Article No.: 09 99 000 0150

for discrete wire termination

Crimping tool

Four-Indent Crimping Tool

Article No.: 09 99 000 0001

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Assembly tool

DSUB BOTTOM-TOOL FOR HOODS

Article No.: 09 99 000 0216

for assembly of D-Sub hoods, Bottom part

Quick change tool

quick change tool BK for FC2

Article No.: 09 98 000 3006

FC 2Conductor cross-section: 0.14 ... 0.56 mm²

Top tool

press in stamp M (42+6)

Article No.: 09 99 000 0270

for use with female connectors, Type M (42+6)

Top tool

DIN-Tool Einpressstempel Q,2Q

Article No.: 09 99 000 0181

for use with male connectors, Type Q, 2Q

Guide frame

GUIDE FRAME LONG TYPE INC BAS

Article No.: 09 99 000 0261

Long type for pcb size x = 123.5 ... 668.5 mm

Quick change tool

quick change tool BK for HD D-Sub

Article No.: 09 98 000 3012

for single D-Sub high density contactsConductor cross-section: 0.14 ... 0.22 mm²

Removal tool

DIN-Tool Abdrehwerkzeug D,E,F

Article No.: 09 99 000 0038

for male contacts of types D, E , F, FM, 2F, MH

Locator

D-Sub HD Positioner for MA Crimp contact

Article No.: 09 99 000 0525

for har-speed M12 male contacts

Top tool

press in stamp M (78+2)

Article No.: 09 99 000 0272

for use with female connectors, Type M (78+2)

Press-out tool

DIN-Tool Ausdrückstempel

Article No.: 09 99 000 0219

for termination length 13 ... 13.2 mm

Crimping machine TC-C01

crimping machine TC-C01 for Han E

Article No.: 09 98 000 9002

for Han E® contactConductor cross-section: 0.14 ... 4 mm²

Quick change tool

quick change tool BK for FC1

Article No.: 09 98 000 3005

FC 1Conductor cross-section: 0.09 ... 0.25 mm²

Assembly tool

GDS A-F CODEPIN INSERTION TOOL

Article No.: 09 99 000 0103

DIN 41612, Insertion tool for coding pin

Cabling tool for termination

DSUB BASE PLATE FOR IDC

Article No.: 09 99 000 0135

for discrete wire termination, Suitable for D-Sub

Top tool

DIN-Tool Einpressstempel F

Article No.: 09 99 000 0229

Only for short posts and PCB thickness > 1.6 mm and without guide frame, for use with female connectors, Type F, H

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 60P

Article No.: 09 99 000 0760

for SEK standard connectors, 60 poles

Top tool

HARPRESS SEK L.P. TOP TOOL

Article No.: 09 99 000 0464

for SEK male low-profile connectors, 64 poles, incl. insert

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 50P

Article No.: 09 99 000 0750

for SEK standard connectors, 50 poles

Pliers

DIN-Tool Kodierzange

Article No.: 09 99 000 0242

DIN 41612, for breaking out the coding area

Top tool

DIN-Tool Einpressstempel C

Article No.: 09 99 000 0228

Only for short posts and PCB thickness > 1.6 mm and without guide frame, for use with female connectors, Type C

Assembly tool

DSUB TOP-TOOL FOR HOODS

Article No.: 09 99 000 0215

for assembly of D-Sub hoods, Top part

Top tool

SEK-18 INSERT-TOOL MA LP PR-IN 06P

Article No.: 09 99 000 0506

for SEK male low-profile connectors, 6 poles, Modular insert

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 16P

Article No.: 09 99 000 0716

for SEK standard connectors, 16 poles

Top tool

SEK-18 TOP-TOOL MA LP PR-IN 14P

Article No.: 09 99 000 0414

for SEK male low-profile connectors, 14 poles, incl. insert

Locator

Locator Han C f. 0001

Article No.: 09 99 000 0308

Han® CConductor cross-section: 1.5 ... 4 mm²

Locator

Locator for D-SUB mixed HV crimp contact

Article No.: 09 99 000 0533

for part number 09 99 000 0501

Locator

DSUB DIE INNER COAX CONTACT

Article No.: 09 99 000 0507

for inner contact die

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 40P

Article No.: 09 99 000 0740

for SEK standard connectors, 40 poles

Top tool

SEK-18 INSERT-TOOL MA LP PR-IN 10P

Article No.: 09 99 000 0510

for SEK male low-profile connectors, 10 poles, Modular insert

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 20P

Article No.: 09 99 000 0720

for SEK standard connectors, 20 poles

Insert

D SUB INSERT FOR MALE IDC 37 pole

Article No.: 09 99 600 0201

for D-Sub male

Crimp die

D SUB MIXED die for outer conductor of

Article No.: 09 99 000 0519

for part number 09 99 000 0503

Locator

D SUB MIXED die for short male power cri

Article No.: 09 99 000 0522

for male contacts, for part number 09 99 000 0509

Locator

D SUB MIXED die for short female power c

Article No.: 09 99 000 0521

for female contacts, for part number 09 99 000 0509

Top tool

HARPRESS SEK MODULAR INSERT TOOL

Article No.: 09 99 000 0550

for SEK male low-profile connectors, 50 poles, Modular insert

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 34P

Article No.: 09 99 000 0734

for SEK standard connectors, 34 poles

Crimp die

D SUB MIXED die for outer conductor of

Article No.: 09 99 000 0515

for D-Sub mixed

Top tool

SEK-18 INSERT-TOOL MA LP PR-IN 64P

Article No.: 09 99 000 0564

for SEK male low-profile connectors, 64 poles, Modular insert

Top tool

HARPRESS SEK L.P. TOP TOOL

Article No.: 09 99 000 0426

for SEK male low-profile connectors, 26 poles, incl. insert

Locator

M12 harspeed locator female

Article No.: 09 99 000 0635

for har-speed M12 female contacts

Hand crimping tool

M23 crimping tool for signal contact

Article No.: 09 99 000 0890

for M23 signal contactsConductor cross-section: 0.08 ... 2.5 mm²

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 64P

Article No.: 09 99 000 0764

for SEK standard connectors, 64 poles

Locator

Locator Han E f. 0001

Article No.: 09 99 000 0310

Han E®Conductor cross-section: 0.14 ... 4 mm²

Removal tool

Repair plier for shroud, 3 rows

Article No.: 09 99 000 0278

for rear I/O shroud types C, 2C, R, 2R

Locator

M 12 Locator for d 0,8

Article No.: 09 99 000 0637

for M12 female contacts, 21 01 100 9025

Crimp die

D SUB MIXED die for outer conductor

Article No.: 09 99 000 0518

for part number 09 99 000 0503, for outer ferrule

Locator

Locator Han D f. 0001

Article No.: 09 99 000 0311

Han D®Conductor cross-section: 0.14 ... 2.5 mm²

Contact lubricant DvDA

CONTACT LUBRICANT (40ml)

Article No.: 09 99 000 0829

for Han® contactsVaporizer (40 ml), Handling instruction

Locator

DSUB POSITIONER PLUG AND RECEPTACLE

Article No.: 09 99 000 0504

for male and female contacts, for part number 09 99 000 0509

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 14P

Article No.: 09 99 000 0714

for SEK standard connectors, 14 poles

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 10P

Article No.: 09 99 000 0710

for SEK standard connectors, 10 poles

Top tool

HARPRESS SEK L.P. TOP TOOL

Article No.: 09 99 000 0410

for SEK male low-profile connectors, 10 poles, incl. insert

Top tool

SEK-18 INSERT-TOOL MA STD PR-IN 26P

Article No.: 09 99 000 0726

for SEK standard connectors, 26 poles

Locator

DSUB POSITIONER SIGNAL CONTACT

Article No.: 09 99 000 0502

Hand hydraulic crimping tool

Hand hydraulic crimping tool 120kN

Article No.: 09 99 000 0861

Pressing force 120 kN, Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mmConductor cross-section: 10 ... 240 mm²

Top tool

HARPRESS SEK MODULAR INSERT TOOL

Article No.: 09 99 000 0526

for SEK male low-profile connectors, 26 poles, Modular insert

Adjustment gauge

Adjustment Gauge 1.0/1.3/1.55/1.8/2.0

Article No.: 09 99 000 0379

for four-indent crimping tools, Han D®, Han E®, Han® C, Han-Yellock®

Punching units

Han-Yellock 30 panel punch

Article No.: 11 99 300 0001

for hydraulic punch driversHan-Yellock® 30

Manufacture tool

SCRJ POF TOOL SET CUT CRIMP

Article No.: 09 35 000 9915

Set for polymer-optical fiber

Replacement cutter and crimp tool

SCRJ POF tool set replacement crimp tool

Article No.: 09 35 000 9917

for tool set 09 35 000 9915

Replacement cutter tool

SCRJ POF tool set replacement cutter

Article No.: 09 35 000 9916

for tool set 09 35 000 9913

Manufacture tool

SCRJ POF TOOL SET CUT

Article No.: 09 35 000 9913

Set for polymer-optical fiber, Without final polishing

Replacement cutter tool

SCRJ POF TOOL SET CUT REPLACEMENT UNIT

Article No.: 09 35 000 9914

for tool set 09 35 000 9913

Assembly tool

RJI Gigalink Cat6A Assembly Tool

Article No.: 09 45 800 0520

for HARTING RJ Industrial® Gigalink connectors

8-indent crimping tool

HPP V4 Power Crimp Tool

Article No.: 09 46 800 0000

incl. locatorConductor cross-section: 0.08 ... 4 mm²

Spare blade cassette

RJI yellow knife box for stripping tool

Article No.: 09 45 800 0001

for part number 09 45 800 0000

Stripping tool

RJI universal cable stripping tool

Article No.: 09 45 800 0002

Assembly tool

HPP V4 Power contact insertion tool

Article No.: 09 46 800 0099

HARTING PushPull (V4) Power, for an easy insertion of male and female contacts into the insulation body

Assembly tool

RJI PROFINET Cat5 Compact Assembly Tool

Article No.: 09 45 800 0530

for HARTING RJ Industrial® PN Compact connector set

Wire cutter

RJI side cutter

Article No.: 09 45 800 0005

Locator

HPP V4 Power Locator f. 09990000001

Article No.: 09 46 800 0010

for HARTING PushPull Power contacts for crimping tool 09 99 000 0001

Stripping tool

RJI Ethernet cable stripping tool

Article No.: 09 45 800 0000

for Ethernet cables incl. blade cassette

Assembly tool

RJI Gigalink Cat6A Compact Assembly Tool

Article No.: 09 45 800 0025

for HARTING RJ Industrial® Gigalink Cat. 6A connectors

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0037

for angled shielded female connectors, for type B, With upper shield

Top tool

har-bus HM Top tool har-bus HMIR

Article No.: 17 99 000 0043

for angled shielded female connectors, for type D, for type E, With upper shield

Insert top tool

Einlegeteiloberstempel CPCI 6HE (5+2)

Article No.: 17 99 000 0063

for straight male connectors, for 6U CompactPCI

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0038

for angled female connectors, for type B

Bottom tool

har-bus HM Bottom tool, male type C

Article No.: 17 99 000 0027

for straight male connectors, for type C

Top tool

HAR-BUS HM POWER OBERWERKZEUG

Article No.: 17 99 000 0102

for angled male connectors, for har-bus® HM Power

Top tool

har-bus HM Press-in die lower

Article No.: 17 99 000 0050

for angled shielded female connectors, Bottom shield, for type AB, for type B

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0059

for angled shielded female connectors, for type AB, With upper shield

Insert

har-bus HM Insert block type A

Article No.: 17 99 000 0071

for straight male connectors, for type AB

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0046

for angled female connectors, for type A, for type AB, for type B

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0025

for straight male connectors, for type AB, for type B

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0014

for straight male connectors, for type A

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0041

for angled shielded female connectors, for type C, With upper shield

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0015

for straight male connectors, for type AB

Insert

har-bus HM Insert block type A

Article No.: 17 99 000 0069

for straight male connectors, for type AB

Insert

HAR-BUS HM INSERT BLOCK TYPE E

Article No.: 17 99 000 0007

for straight male connectors, for type E

Insert

TOOL HM-INSERT BLOCK TYPE AB22

Article No.: 17 99 000 0070

for straight male connectors, for type AB

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0058

for angled female connectors, for type AB

Spacer block

har-bus HM Spacer block 38 mm

Article No.: 17 99 000 0054

38 mm

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0039

for angled shielded female connectors, for type B, With upper shield

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0029

for angled female connectors, for type A, for type AB

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0020

for straight male connectors, for type B

Spacer block

har-bus HM Spacer block 25 mm

Article No.: 17 99 000 0055

25 mm

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0024

for straight male connectors, for type AB, for type B

Insert

har-bus HM Tooth insert for t

Article No.: 17 99 000 0068

for straight male connectors, for type B, With 19 positions

Centering plate female

har-bus HM centering plate fem

Article No.: 17 99 000 0060

Left

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0022

for straight male connectors, for type D

Insert

TOOL HM-INSERT BLOCK TYPE A

Article No.: 17 99 000 0009

for straight male connectors, for type A

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0018

for straight male connectors, for type B

Insert

Zahneinlegeteil har-bus HM DE (8+2)

Article No.: 17 99 000 0072

for straight male connectors, for type DE

Insert

Einlegeteil har-bus PCI eint. (5+2)

Article No.: 17 99 000 0008

for straight male connectors, for type Monoblock 47 connectors

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0048

for angled female connectors, for type D, for type E

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0047

for angled female connectors, for type C

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0042

for angled female connectors, for type D, for type E

Centering plate female

har-bus HM centering plate fem

Article No.: 17 99 000 0061

Right

Spacer block

har-bus HM Spacer block 50 mm

Article No.: 17 99 000 0052

50 mm

Insert

HAR-BUS HM INSERT BLOCK TYPE D

Article No.: 17 99 000 0006

for straight male connectors, for type D

Spacer block

har-bus HM Spacer block 0,67 m

Article No.: 17 99 000 0057

0.67 mm, CompactPCI

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0034

for angled female connectors, for type B

Insert

HAR-BUS HM TOOL

Article No.: 17 99 000 0002

for straight male connectors, for type B

Spacer block

har-bus HM Spacer block 5 mm

Article No.: 17 99 000 0056

5 mm

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0026

for straight male connectors, for type A, for type AB, for type B

Top tool

har-bus HM Press-in die lower

Article No.: 17 99 000 0051

for angled shielded female connectors, Bottom shield, for type A, for type AB, for type B, for type D, for type E

Assembly tool

Montagewerkzeug für Kodiereinsatz

Article No.: 17 99 000 0093

for har-bus® HM coding keys

Top tool

har-bus HM Press-in die lower

Article No.: 17 99 000 0049

for angled shielded female connectors, Bottom shield, for type AB, for type B

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0033

for angled shielded female connectors, for type AB, With upper shield

Insert top tool

har-bus HM Insert top tool 3U

Article No.: 17 99 000 0065

for straight male connectors, for 3U CompactPCI

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0044

for angled female connectors, for type AB, for type B

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0019

for straight male connectors, for type B

Insert

har-bus HM Tooth insert for mo

Article No.: 17 99 000 0066

for straight male connectors, for type Monoblock 47 connectors

Insert

HAR BUS HM TOOL

Article No.: 17 99 000 0003

for straight male connectors, for type B

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0017

for straight male connectors, for type AB

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0016

for straight male connectors, for type AB

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0036

for angled female connectors, for type B

Spacer block

har-bus HM Spacer block 44 mm

Article No.: 17 99 000 0053

44 mm

Top tool carrier

har-bus HM Top tool carrier

Article No.: 17 99 000 0012

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0023

for straight male connectors, for type E

Insert blocks

DIN-Signal harbus64 insert block shroud

Article No.: 02 09 000 0012

for use with shrouds, har-bus® 64, Type E

Removal tool

DIN-Signal harbus64 Removal tool mould

Article No.: 02 99 000 0006

for har-bus 64® female connectors

Removal tool

DIN-Signal harbus64 Removal tool mould

Article No.: 02 99 000 0003

for har-bus 64® female connectors

Press-out tool

DIN-Signal harbus64 Press-out tool short

Article No.: 02 99 000 0008

for har-bus 64® female connectors, for 5 mm / 4.5 mm terminations

Press-out tool

DIN-Signal harbus64 Press-out tool 17 mm

Article No.: 02 99 000 0004

for har-bus 64® female connectors, for 17 mm terminations

Removal tool

DIN-Signal harbus64 Removal tool shroud

Article No.: 02 99 000 0007

for rear I/O shroud har-bus® 64

Bottom tool

har-bus 64 Bottom tool, narrow

Article No.: 02 99 000 0001

Narrow, for use with female connectors, har-bus® 64

Support block

DIN-Signal harbus64 Support block female

Article No.: 02 99 000 0005

for har-bus 64® female connectors

Top tool

DIN-Signal Top Tool for harbus64 female

Article No.: 02 99 000 0002

for use with female connectors, har-bus® 64

Top tool

har-bus 64 top tool encompassed

Article No.: 02 99 000 0016

Only for short posts and PCB thickness > 1.6 mm and without guide frame, for use with female connectors, har-bus® 64

Cabling tool for termination

har-flex base plate for IDC tool

Article No.: 15 97 000 0500 000

for discrete wire termination, Suitable for har-flex® female

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0030

for angled shielded female connectors, for type A, for type AB, With upper shield

Bottom tool carrier

HAR-BUS HM 3U bottom tool carrier

Article No.: 17 99 000 0074

for 3U

Insert

HAR BUS HM TOOL

Article No.: 17 99 000 0001

for straight male connectors, for type C

Bottom tool

HAR-BUS HM POWER UNTERWERKZEUG

Article No.: 17 99 000 0103

for angled male connectors, for har-bus® HM Power

Assembly tool

Einsetz- und Richtwerkz.f. Einzelkontakt

Article No.: 17 99 000 0094

har-bus® HM, Insertion tool for single male press-in contacts

Bottom tool carrier

har-bus HM Bottom tool carrier

Article No.: 17 99 000 0013

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0045

for angled female connectors, for type AB, for type B

Insert

HAR BUS HM, TOOL)

Article No.: 17 99 000 0004

for straight male connectors, for type B

Removal tool

har-bus HM. Tool kit shroud removal

Article No.: 17 99 000 0095

for har-bus® HM shrouds

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0021

for straight male connectors, for type C

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0032

for angled female connectors, for type AB

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0031

for angled shielded female connectors, for type A, With divided shield, for computer telephony

Bottom tool

har-bus HM Bottom tool har-bus

Article No.: 17 99 000 0028

for straight male connectors, for type D, for type E

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0040

for angled female connectors, for type C

Top tool

har-bus HM Top tool har-bus HM

Article No.: 17 99 000 0035

for angled shielded female connectors, for type B, With upper shield

Top tool carrier

HAR-BUS HM 3U top tool carrier

Article No.: 17 99 000 0073

for 3U

Tool-kit

Tool kit glass fibre

Article No.: 20 99 000 3015

Only measuring device

PCB

BCCTF-40GHz PCB SIG DE-EMB

Article No.: 20 82 999 0102

Spare part

PCB

BCCTF-40GHz PCB AWG 34-36 (VPE 10)

Article No.: 20 82 999 0104

Spare part

PCB

BCCTF-40GHz PCB AWG 22-26 (VPE 10)

Article No.: 20 82 999 0100

Spare part

PCB

BCCTF-40GHz PCB AWG 28-32 (VPE 10)

Article No.: 20 82 999 0101

Spare part

Slider

BCCTF-40GHz Slider AWG 22-26

Article No.: 20 82 999 0200

Spare part

Cable test adapter

BCCTF-40GHz Test-Set Box

Article No.: 20 82 999 0040

Spare part box

BCCTF-40GHz Spare Part Box

Article No.: 20 82 999 0301

Spare part

Slider

BCCTF-40GHz Slider AWG 28-32

Article No.: 20 82 999 0201

Spare part

Wire fixing rubber

BCCTF-40GHz Fixing Rubber (10pcs)

Article No.: 20 82 999 0202

Spare part

Check gauge

Go / No-Go gage for 09990000501

Article No.: 09 99 000 0617

New

Dynamometric screwdriver

M12-ACC-TORQUE WRENCH SW18

Article No.: 09 99 000 0659

for M12 PowerWrench size: 18

Dynamometric screwdriver

M8-ACC-TORQUE WRENCH SW13

Article No.: 09 99 000 0660

for M8Wrench size: 13

New

Locator

Locator M12

Article No.: 09 99 000 0618

for part number 09 99 000 0501 and Data- und Power contacts Y-coding

Punching units

Han-Modular Eco Punching unit

Article No.: 09 99 000 0913

for hydraulic punch driversHan-Modular® ECO

New

Tool insert

ix Industrial handtool insert 2

Article No.: 09 45 800 0187

for ix Industrial® assembly tool, for angled variant, for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

New

Assembly tool

ix Industrial handtool frame

Article No.: 09 45 800 0185

New

Tool insert

ix Industrial handtool insert 1

Article No.: 09 45 800 0186

for ix Industrial® assembly tool, for straight variant, for HARTING ix Industrial® and HARTING Mini PushPull ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

Insertion Tool Han-Mod f. single modules

New

Assembly tool

Insertion Tool Han-Mod f. single modules

Article No.: 09 99 000 1001

Han-Modular®, for single modules

New

Test adapter set

T1 Ind. PCB for Fluke test adapter set

Article No.: 20 82 999 2810

Polishing tool

Polish tool for ferrule

Article No.: 20 99 000 1096

Ferrule

Polishing tool

Polish tool for SC POF

Article No.: 20 99 000 1099

SC POF

One click cleaner

One Click Cleaner 2,5 mm

Article No.: 20 80 001 9921

2.5 mm

One click cleaner

One Click Cleaner 1,25 mm

Article No.: 20 80 001 9920

1.25 mm

New

Assembly tool

Tool for single pole size 1&2

Article No.: 09 99 000 0297

For SP1 and SP2Wrench size: 46

Interchangeable blades

replacement blade for 09990000615

Article No.: 09 99 000 0616

for part number 09 99 000 0615

Cable cutter

scissors for ribbon cable

Article No.: 09 99 000 0615

for discrete wire termination, Suitable for D-Sub and SEK

har-modular assem. aid for 2-row-coupler

New

Assembly tool

har-modular assem. aid for 2-row-coupler

Article No.: 02 09 500 0009

for distance fixing brackets

New

Hand crimping tool

M17 crimping tool for single contacts

Article No.: 09 99 000 0695

for M17 contactsConductor cross-section: 0.08 ... 2.5 mm²

New

Locator

Locator for M17 crimping tool

Article No.: 09 99 000 0696

for crimping tool 09 99 000 0695 and 09 99 000 0890

New

Tool insert

ix Industrial handtool insert 3

Article No.: 09 45 800 0188

for ix Industrial® assembly tool, for in-line cable jack variant, for HARTING ix Industrial® to assamble the cable strain relief crimping

New

Removal tool

Removal Tool TC70 (monoblock)

Article No.: 09 99 000 0015

for TC 70 contacts

Spare part

ix Industrial assembly positioner

Article No.: 09 45 800 0180

for HARTING ix Industrial® IP20 PushPull and Mini PushPull ix Industrial® for positioning the cable guides on the IDC unit. Required for the assembly of AWG 22 variants.

Assembly tool

har-flex assembly tool, IDC to board

Article No.: 09 99 000 0698

for har-flex® Board IDC

New

Locator

Locator Han C (4-10 mm²) f. 0990

Article No.: 09 99 000 0996

Spare part, Han® C, for part number 09 99 000 0990Conductor cross-section: 4 ... 10 mm²

491 (of 491)