Crimping

CONTACT LUBRICANT (40ml)

for Han® contactsVaporizer (40 ml), Handling instruction

Han CRIMP TOOL WITH LOCATOR

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²Conductor cross-section: 0.14 ... 2.5 mm²

Han Hand Crimp Tool

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Double-Indent Crimping Tool

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

Crimping Tool Han C 4/6/10 mm2

Han® C: 4 ... 10 mm²Conductor cross-section: 4 ... 10 mm²

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

Locator D-Sub turned standard contacts

for single D-Sub standard contacts

basic hand crimp tool BC/FC/har-bus64

for individual DIN 41612 contacts, BC / FC / har-bus® 64

crimp set FC 3

for individual contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts

SUB-D CRIMP TOOL SINGLE CONTACT

for single stamped D-Sub contactConductor cross-section: 0.09 ... 0.56 mm²

Crimp set BC/FC1/har-bus 64

for individual contacts, BC / FC 1 / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts

crimp set FC 2

for individual contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts

Go / no-go gauge for 09990000888

for crimping tool 09 99 000 0888, for optional testing

DIN-Tool Ersatzhülse M

DIN 41612, for removal tool 09 99 000 0174

DIN-Tool Positionierer FC

FC, for part number 09 99 000 0620

D SUB HD SERVICE CRIMP TOOL

Crimptool Opening

for crimp barrel and crimp flange

Crimp die 16mm² for 60 kN tool

for 60 kN toolConductor cross-section: 16 mm²

Crimp die 10mm² for 60 kN tool

for 60 kN toolConductor cross-section: 10 mm²

Locator Set Han D/E/C, for Crimping tool

Spare part, Han D®, Han E®, Han® C

Crimp die 25mm² for 60 kN tool

for 60 kN toolConductor cross-section: 25 mm²

Crimp die 35mm² for 60 kN tool

for 60 kN toolConductor cross-section: 35 mm²

Hand hydraulic crimping tool 60 kN

Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mmConductor cross-section: 10 ... 70 mm²

Locator f. crimping-tool 09990000888

Spare part, for crimping tool 09 99 000 0888

DSUB HAND CRIMP TOOL POWER CONTACT

for power contactsConductor cross-section: 0.5 ... 6 mm²

DIN-Tool Positionierer BC

BC / har-bus® 64, for part number 09 99 000 0620

Locator D-Sub für. 0501 (Gigabit Modul )

for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476

DSUB HAND TOOLS

for 500 bandoliered standard contactsConductor cross-section: 0.09 ... 0.56 mm²

Han Yellock Locator for 0021 tool

Han-Yellock®

Crimp die 50mm² for 60 kN tool

for 60 kN toolConductor cross-section: 50 mm²

Battery Crimping Tool Set

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

CRIMPING TOOL

for 250 bandoliered contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping tool for 1mm POF

for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST

DIN-Tool Crimptool Coax M

Crimp die included, for coaxial contact, acc. to DIN 41626

GDS A-B/C CRIMPING TOOL ON REEL

for 500 bandoliered contacts, BC / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm²

Crimp die 25mm² for 120 kN tool

for 120 kN toolConductor cross-section: 25 mm²

Crimp die 16mm² for 120 kN tool

for 120 kN toolConductor cross-section: 16 mm²

Ferrule Crimp tool 10mm2

for wire end ferrulesConductor cross-section: 10 mm²

Crimp die 70mm² for 60 kN tool

for 60 kN toolConductor cross-section: 70 mm²

Crimp die 10mm² for 120 kN tool

for 120 kN toolConductor cross-section: 10 mm²

Han Yellock Locator for 0110 tool

Han-Yellock®

Crimp die 70mm² for 120 kN tool

for 120 kN toolConductor cross-section: 70 mm²

case for crimping tool

for crimping tool and 5 sets inserts, incl. screwdriver for insert change, without contents

Crimp die 35mm² for 120 kN tool

for 120 kN toolConductor cross-section: 35 mm²

DSUB HAND CRIMP TOOL OUTER COAX CONT.

for coaxial contact, acc. to DIN 41626, for outer ferrule

Crimp die 50mm² for 120 kN tool

for 120 kN toolConductor cross-section: 50 mm²

D-Sub DIE OUTER COAX CONTACT

for D-Sub

Locator Han-Yellock 20A f. 0001

Han-Yellock®

Crimp die 95mm² for 120 kN tool

for 120 kN toolConductor cross-section: 95 mm²

DIN-Tool Crimpzange FC2

for 250 bandoliered contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm²

Crimp die 120mm² for 120 kN tool

for 120 kN toolConductor cross-section: 120 mm²

Crimping tool Han-Fast Lock 4-10mm²

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 4 ... 10 mm²

CRIMPING TOOL FOR POF

for FO connector (plastic fibre), SC, F-SMA F-ST

Crimping tool for glass fibre

for FO connector (glass fibre), SC, F-SMA F-ST

Set Han C (4-10 mm²) f. 0990

for part number 09 99 000 0990, Han® C: 4 ... 10 mm², incl. locator

Locator Han P f. 0001

Han® PConductor cross-section: 0.5 ... 2.5 mm²

Locator Han P Contact

for crimping tool 09 99 000 0888

Crimp die 150mm² for 120 kN tool

for 120 kN toolConductor cross-section: 150 mm²

crimping machine TK-M

Basic machine without interchangeable unit

Crimping tool Han-Fast Lock 1.5/2.5 mm²

Angled, for Han-Fast® Lock single contactConductor cross-section: 1.5 ... 2.5 mm²

Crimping Tool Han HsB 1.5/2.5/4 mm²

Han® HsB: 1.5 ... 4 mm²Conductor cross-section: 1.5 ... 4 mm²

Locator Han HsB 4/6/10 mm² f. 0377

for part number 09 99 000 0377, Han® HsB: 4 ... 10 mm²

Crimping Tool Han-Fast Lock 1.5/2.5mm²

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 1.5 ... 2.5 mm²

Crimp die 240mm² for 120 kN tool

for 120 kN toolConductor cross-section: 240 mm²

Locator Han D f. 0990

Spare part, Han D®, for part number 09 99 000 0990Conductor cross-section: 0.14 ... 1.5 mm²

Crimping tool Han-Fast Lock 4-10mm² angl

Angled, for Han-Fast® Lock single contactConductor cross-section: 4 ... 10 mm²

Crimp die 185mm² for 120 kN tool

for 120 kN toolConductor cross-section: 185 mm²

Interchangeable unit TK-M for Han E

Han E®Conductor cross-section: 0.14 ... 4 mm²

Interchangeable units for Han D

Han D®Conductor cross-section: 0.14 ... 2.5 mm²

DSUB HAND CRIMP TOOL SIGNAL CON.W.P

for signal contacts

D SUB HD CR. TOOL F.500 PCS REEL- CS 20

for 500 bandoliered D-Sub high density contacts

Locator Han E f. 0990

Spare part, Han E®, for part number 09 99 000 0990Conductor cross-section: 0.5 ... 4 mm²

Locator-Set Han E / Han D

Spare part, Han D®, Han E®

Ferrule crimp tool 16 / 25qmm

for wire end ferrulesConductor cross-section: 16 ... 25 mm²

Interchangeable unit TK-M for Han C

Han® CConductor cross-section: 1.5 ... 6 mm²

Hand crimping tool UIC 558

HARTING UIC 558: 0.75 ... 1 mm²Conductor cross-section: 0.75 ... 1 mm²

Crimping Set FC3

for individual DIN 41612 contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping set for solid BC,har-bus 64

for individual contacts, BC / har-bus® 64Conductor cross-section: 0.13 mm² for BC contacts

DIN-Tool Crimpzange Rolle FC1

for 250 bandoliered contacts, FC 1Conductor cross-section: 0.09 ... 0.25 mm²

Interchangeable unit TK-M for D-Sub

D-SubConductor cross-section: 0.09 ... 0.82 mm²