PLUG M12-F 8 POLOS / A-COD

Article No.: 21 03 121 2801

Image is for illustration purposes only. Please refer to product description.

Cable connector

Article No.: 21 03 121 2801

to see prices and availability.

Cable connector

Straight

Female

A-coding

IDC termination

Polyamide (PA)

Contacts: 8

Brass Au over Ni Mating side

Conductor cross-section: 0.14 ... 0.34 mm²

Rated current: ‌2 A

Zinc die-cast

Screw locking

Degree of protection: IP65 / IP67 mated condition

Identification

Version

Technical characteristics

Limiting temperature	-40 ... +85 °C
Degree of protection acc. to IEC 60529	IP65 / IP67 mated condition
Contact resistance	≤ 10 mΩ
Conductor cross-section	0.14 ... 0.34 mm²
Conductor cross-section [AWG]	AWG 26 ... AWG 22
Rated current	‌ 2 A
Rated voltage	30 V
Rated impulse voltage	0.8 kV
Pollution degree	3
Mating cycles	≥ 100
Tightening torque	‌0.4 Nm
Insulation resistance	>10⁸ Ω
Overvoltage category	II
Wire outer diameter	≤ 1.6 mm
Isolation group	I (600 ≤ CTI)
Cable diameter	4 ... 8 mm

Specifications and approvals

Specifications	IEC 61076-2-101

Material properties

Material (hood/housing)	Zinc die-cast
Material (contacts)	Brass
Surface (contacts)	Au over Ni Mating side
Material (insert)	Polyamide (PA)
RoHS	compliant with exemption
RoHS exemptions	6(c): Copper alloy containing up to 4 % lead by weight
ELV status	compliant with exemption
China RoHS	50
REACH Annex XVII substances	Not contained
REACH ANNEX XIV substances	Not contained
REACH SVHC substances	Yes
REACH SVHC substances	Lead
ECHA SCIP number	0d7d3693-d625-47ab-934a-d241bf72c86e
California Proposition 65 substances	Yes
California Proposition 65 substances	Lead
Fire protection on railway vehicles	EN 45545-2 (2020-08)
Requirement set with Hazard Levels	R26

Commercial data

eCl@ss	27440116 Circular connector (for field assembly)
Net weight	50 g
Packaging size	1
Country of origin	Germany
European customs tariff number	85366990
GTIN	5713140137257
ETIM	EC002635