Assembly tools

DSUB INSERTION-REMOVAL-TOOL

for single D-Sub standard contacts

Insertion Tool, Han

for crimp contacts

Insertion/Removal Tool D-Sub

Han-Modular®, for D-Sub crimp contact

D SUB HD INSERTION EXTRACTION TOOL

for single D-Sub high density contacts

Mounting tool Han D/E/Yellock

for crimp contacts, Small cross-section, Variable length of blade, Han D®, Han E®, Han-Yellock®

DIN-TOOL MONTAGE CRIMP FC

DIN 41612, for contacts FC 1, FC 2 and FC 3

Hexagonal Screw Driver SW 2

for axial screw, With grip, 40 A contactWrench size: 2

preLink Assembly tool

for preLink® termination block

Removal Tool f. Han ES

for Han® ES insert

hexagonal wrench adapter SW2

Bit ¼in, 40 A contact, for axial screwWrench size: 2

DIN-Tool Montage Crimp BC

DIN 41612, for contacts BC / har-bus® 64

Single Bit guiding pins/bushes

M12 dynamometric screwdriver SW15

for M12 Slim DesignWrench size: 15

Hexagonal Wrench Adapter SW2,5

Bit ¼in, 70 A contact, for axial screwWrench size: 2.5

Torque Set Power Contacts SW2,5/2/PH2

for power contact, incl. reversing blade (AF 2.0 + AF 2.5 + PH2), + different bits, + adapter blade, Tightening torque: 1 ... 5 Nm

insertion/removal tool Han 1A/D-Sub

for D-Sub crimp contact, Han® 1A

POLISH PAPER FOR POF GRAIN SIZE 1

for POF grain size 1000

Ball end hexagonal screwdriver SW2.5x100

for InduCom hoods with hexagonal screws, With ball end

Torque driver set for guide pins/bushing

for guiding pins and bushes, Tightening torque: 0.5 Nm, incl. 1/4in Bit

M12-TORQUE KEY SW17 (0,6Nm)

for M12-LWrench size: 17

Hexagonal screwdriver SW5-for 200A+350A

With grip, for axial screwWrench size: 5

hexagonal wrench adapter SW4

Adapter 3/8in, for axial screwWrench size: 4

Screwdriver Set Han VDE

The standard set

har-flexicon screw driver, 2.0 x 40

2.0 x 40

hexagonal wrench adapter SW5

Adapter 3/8in, for axial screwWrench size: 5

POLISH TOOL FOR 2.2MM POF CABLE

POF cable 2.2 mm diameter

Torque Set HC SW 4/5

for High Current axial screw contact, incl. reversing blade (AF 4.0 + AF 5.0), Tightening torque: 5 ... 14 Nm

M12-Torque key SW13 (0,6Nm)

for M12-SWrench size: 13

Screw Driver Set Slimline

Insolated blade for slim assembly

hexagonal wrench adapter SW8

Adapter 3/8in, for axial screwWrench size: 8

assembly- disassembly tool

Han® EasyCon, for assembly and disassembly of shielding clamps

M8 Assembley Key SW9 (0,4 Nm)

for M8Wrench size: 9

Torque Driver Han 3A, 4A, Q5/0, Staf

Han® 3 A, Han® 3 A Push-In, Han® Q 5/0, Staf®

Torque Set Power Han Screw E/A/Fixing

for HARTING screw contacts and fixing screws, Tightening torque: 0.5 ... 1.2 Nm

Polish tool for DIN 41626

DIN 41612

har-flexicon screw driver, 1.5 x 40

1.5 x 40

7/8"-Torque key SW22 (1,5Nm)

for 7/8"Wrench size: 22

Replacement sleeve for 09990000847

for part number 09 99 000 0847

Polish paper for glass fibre, gra in siz

for GI 1 μ-grain size

TOOL KIT POF 2

With measuring device

Polish tool for SC

SC

Polish paper for glass fibre, gra in siz

for GI 9 μ-grain size

Polish tool for FH-ST

F-ST

Polierset HP duplex

Assembly Tool Han F+B cable gland

Han® F+B, Cable gland

HPP V4 Power contact insertion tool

HARTING PushPull (V4) Power, for an easy insertion of male and female contacts into the insulation body

DSUB BOTTOM-TOOL FOR HOODS

for assembly of D-Sub hoods, Bottom part

GDS A-F CODEPIN INSERTION TOOL

DIN 41612, Insertion tool for coding pin

DIN-Tool Kodierzange

DIN 41612, for breaking out the coding area

Einsetz- und Richtwerkz.f. Einzelkontakt

har-bus® HM, Insertion tool for single male press-in contacts

har-bus HM. Tool kit shroud removal

for har-bus® HM shrouds

Tool kit glass fibre

Only measuring device

Mounting tool for flange - hood 50P

for flange, for D-Sub hoods (50 contacts)

Mounting tool for flange - hood 9-37P

for flange, for D-Sub hoods (9-37 contacts)

ix Industrial assembly tool

for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

har-port assembly tool

To tighten the har-port fixing nut

M12-ACC-TORQUE WRENCH SW18

for M12 PowerWrench size: 18

M8-ACC-TORQUE WRENCH SW13

for M8Wrench size: 13

har-modular assembling aid

ix Industrial handtool insert 2

for ix Industrial® assembly tool, for angled variant, for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

ix Industrial handtool frame

ix Industrial handtool insert 1

for ix Industrial® assembly tool, for straight variant, for HARTING ix Industrial® and HARTING Mini PushPull ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

Insertion Tool Han-Mod f. single modules

Han-Modular®, for single modules

Polish tool for ferrule

Ferrule

Polish tool for SC POF

SC POF

Tool for single pole size 1&2

For SP1 and SP2Wrench size: 46

One Click Cleaner 2,5 mm

2.5 mm

One Click Cleaner 1,25 mm

1.25 mm

har-modular assem. aid for 2-row-coupler

for distance fixing brackets

ix Industrial assembly positioner

for HARTING ix Industrial® IP20 PushPull and Mini PushPull ix Industrial® for positioning the cable guides on the IDC unit. Required for the assembly of AWG 22 variants.

har-flex assembly tool, IDC to board

for har-flex® Board IDC