Crimping

Han CRIMP TOOL WITH LOCATOR

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²Conductor cross-section: 0.14 ... 2.5 mm²

Han Hand Crimp Tool

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Double-Indent Crimping Tool

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

Crimping Tool Han C 4/6/10 mm2

Han® C: 4 ... 10 mm²Conductor cross-section: 4 ... 10 mm²

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

Locator D-Sub turned standard contacts

for single D-Sub standard contacts

basic hand crimp tool BC/FC/har-bus64

for individual DIN 41612 contacts, BC / FC / har-bus® 64

crimp set FC 3

for individual contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm² for FC 3 contacts

SUB-D CRIMP TOOL SINGLE CONTACT

for single stamped D-Sub contactConductor cross-section: 0.09 ... 0.56 mm²

Crimp set BC/FC1/har-bus 64

for individual contacts, BC / FC 1 / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm² for BC contacts 0.09 ... 0.25 mm² for FC 1 contacts

crimp set FC 2

for individual contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm² for FC 2 contacts

Go / no-go gauge for 09990000888

for crimping tool 09 99 000 0888, for optional testing

DIN-Tool Ersatzhülse M

DIN 41612, for removal tool 09 99 000 0174

DIN-Tool Positionierer FC

FC, for part number 09 99 000 0620

D SUB HD SERVICE CRIMP TOOL

Crimptool Opening

for crimp barrel and crimp flange

Crimp die 16mm² for 60 kN tool

for 60 kN toolConductor cross-section: 16 mm²

Crimp die 10mm² for 60 kN tool

for 60 kN toolConductor cross-section: 10 mm²

Locator Set Han D/E/C, for Crimping tool

Spare part, Han D®, Han E®, Han® C

Crimp die 25mm² for 60 kN tool

for 60 kN toolConductor cross-section: 25 mm²

Crimp die 35mm² for 60 kN tool

for 60 kN toolConductor cross-section: 35 mm²

Hand hydraulic crimping tool 60 kN

Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mmConductor cross-section: 10 ... 70 mm²

Locator f. crimping-tool 09990000888

Spare part, for crimping tool 09 99 000 0888

DSUB HAND CRIMP TOOL POWER CONTACT

for power contactsConductor cross-section: 0.5 ... 6 mm²

DIN-Tool Positionierer BC

BC / har-bus® 64, for part number 09 99 000 0620

Locator D-Sub für. 0501 (Gigabit Modul )

for single D-Sub standard contacts, 09 93 000 5576 + 09 93 000 5476

DSUB HAND TOOLS

for 500 bandoliered standard contactsConductor cross-section: 0.09 ... 0.56 mm²

Han Yellock Locator for 0021 tool

Han-Yellock®

Crimp die 50mm² for 60 kN tool

for 60 kN toolConductor cross-section: 50 mm²

Battery Crimping Tool Set

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

CRIMPING TOOL

for 250 bandoliered contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping tool for 1mm POF

for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST

DIN-Tool Crimptool Coax M

Crimp die included, for coaxial contact, acc. to DIN 41626

Battery hydraulic crimping tool 60 kN

Pressing force 60 kN, Crimp die acc. to DIN 46235 with pressing width 9 mmConductor cross-section: 10 ... 70 mm²

GDS A-B/C CRIMPING TOOL ON REEL

for 500 bandoliered contacts, BC / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm²

Crimp die 25mm² for 120 kN tool

for 120 kN toolConductor cross-section: 25 mm²

Crimp die 16mm² for 120 kN tool

for 120 kN toolConductor cross-section: 16 mm²

Ferrule Crimp tool 10mm2

for wire end ferrulesConductor cross-section: 10 mm²

Crimp die 70mm² for 60 kN tool

for 60 kN toolConductor cross-section: 70 mm²

Crimp die 10mm² for 120 kN tool

for 120 kN toolConductor cross-section: 10 mm²

Han Yellock Locator for 0110 tool

Han-Yellock®

Crimp die 70mm² for 120 kN tool

for 120 kN toolConductor cross-section: 70 mm²

case for crimping tool

for crimping tool and 5 sets inserts, incl. screwdriver for insert change, without contents

Crimp die 35mm² for 120 kN tool

for 120 kN toolConductor cross-section: 35 mm²

DSUB HAND CRIMP TOOL OUTER COAX CONT.

for coaxial contact, acc. to DIN 41626, for outer ferrule

Crimp die 50mm² for 120 kN tool

for 120 kN toolConductor cross-section: 50 mm²

D-Sub DIE OUTER COAX CONTACT

for D-Sub

Locator Han-Yellock 20A f. 0001

Han-Yellock®

Crimp die 95mm² for 120 kN tool

for 120 kN toolConductor cross-section: 95 mm²

DIN-Tool Crimpzange FC2

for 250 bandoliered contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm²

Crimp die 120mm² for 120 kN tool

for 120 kN toolConductor cross-section: 120 mm²

Crimping tool Han-Fast Lock 4-10mm²

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 4 ... 10 mm²

CRIMPING TOOL FOR POF

for FO connector (plastic fibre), SC, F-SMA F-ST

Crimping tool for glass fibre

for FO connector (glass fibre), SC, F-SMA F-ST

Set Han C (4-10 mm²) f. 0990

for part number 09 99 000 0990, Han® C: 4 ... 10 mm², incl. locator

Locator Han P f. 0001

Han® PConductor cross-section: 0.5 ... 2.5 mm²

Locator Han P Contact

for crimping tool 09 99 000 0888

Battery hydraulic crimping tool 120kN

Pressing force 120 kN, Crimp die acc. to DIN 46235 with pressing width 10 ... 14 mmConductor cross-section: 10 ... 240 mm²

Crimp die 150mm² for 120 kN tool

for 120 kN toolConductor cross-section: 150 mm²

crimping machine TK-M

Basic machine without interchangeable unit

Crimping tool Han-Fast Lock 1.5/2.5 mm²

Angled, for Han-Fast® Lock single contactConductor cross-section: 1.5 ... 2.5 mm²

Crimping Tool Han HsB 1.5/2.5/4 mm²

Han® HsB: 1.5 ... 4 mm²Conductor cross-section: 1.5 ... 4 mm²

Locator Han HsB 4/6/10 mm² f. 0377

for part number 09 99 000 0377, Han® HsB: 4 ... 10 mm²

Crimping Tool Han-Fast Lock 1.5/2.5mm²

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 1.5 ... 2.5 mm²

Crimp die 240mm² for 120 kN tool

for 120 kN toolConductor cross-section: 240 mm²

Locator Han D f. 0990

Spare part, Han D®, for part number 09 99 000 0990Conductor cross-section: 0.14 ... 1.5 mm²

Crimping tool Han-Fast Lock 4-10mm² angl

Angled, for Han-Fast® Lock single contactConductor cross-section: 4 ... 10 mm²

Crimp die 185mm² for 120 kN tool

for 120 kN toolConductor cross-section: 185 mm²

Interchangeable unit TK-M for Han E

Han E®Conductor cross-section: 0.14 ... 4 mm²

Interchangeable units for Han D

Han D®Conductor cross-section: 0.14 ... 2.5 mm²

DSUB HAND CRIMP TOOL SIGNAL CON.W.P

for signal contacts

D SUB HD CR. TOOL F.500 PCS REEL- CS 20

for 500 bandoliered D-Sub high density contacts

Locator Han E f. 0990

Spare part, Han E®, for part number 09 99 000 0990Conductor cross-section: 0.5 ... 4 mm²

Locator-Set Han E / Han D

Spare part, Han D®, Han E®

Ferrule crimp tool 16 / 25qmm

for wire end ferrulesConductor cross-section: 16 ... 25 mm²

Interchangeable unit TK-M for Han C

Han® CConductor cross-section: 1.5 ... 6 mm²

Hand crimping tool UIC 558

HARTING UIC 558: 0.75 ... 1 mm²Conductor cross-section: 0.75 ... 1 mm²

Crimping Set FC3

for individual DIN 41612 contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping set for solid BC,har-bus 64

for individual contacts, BC / har-bus® 64Conductor cross-section: 0.13 mm² for BC contacts

DIN-Tool Crimpzange Rolle FC1

for 250 bandoliered contacts, FC 1Conductor cross-section: 0.09 ... 0.25 mm²