Locking systems for hoods and housings
Two levers at the bottom part of the housing
Two levers at the bottom part of the housing
Secure locking ensured by four locking points
Minimal space requirements and high locking force
Ideal for laterally arranged connectors
Two levers on the hood
Secure locking ensured by four locking points
Minimal space requirements and high locking forces
Ideal for laterally arranged connectors and surface-mounted housings with caps
Two levers on the hood
One lever at the bottom part of the housing
One lever at the bottom part of the housing
Two locking points along the longitudinal axis
Easy to access even with cable entering laterally
Cap on the upper part of the housing can be locked
One lever aligned centrally
Two locking points along the transverse axis
Easily accessible if cable enters laterally
Ideal for laterally arranged connectors
Easy to handle due to large leverage
One lever aligned centrally
Screw / bayonet locking system
Screw / bayonet locking system
Actuated using a hexagon wrench or screwdriver
Vibration-proof connections with outstanding sealing effect
Easy to access even with cable entering laterally
Prevents accidental or unauthorised opening
Han® Hood Link locking system
A resistant elastomer element connects and seals (IP65) hood and housing
Ideal for quick and easy (flying) cable-to-cable connections
Resistant to oils and gases; absorbing external mechanical forces
Han® Hood Link locking system
Latched locking mechanism inside
Latched locking mechanism inside
Easy handling: simply press yellow push buttons simultaneously to lock with an audible click; only one hand needed to lock/unlock
Protected against vibration, shock and unintentional opening: turning yellow button by 90 degrees prevents accidental disconnects. Optionally available with additional blocking function
Compact design
Han® PushPull locking system
The inner, circular locking profile guarantees a self-locking, durable and tightly sealed (IP67) device connection
Easy-to-handle: locking mechanism is intuitively plugged with an audible click, unplugged by simply pulling out the connector after having released the interlock ring
Device connector, occupying very little space
Han® PushPull locking system
Directly mounted to panel (without bulkhead mounted housing)
Directly mounted to panel (without bulkhead mounted housing)
The hood is attached directly to the electrical cabinet panel using mounting flanges
A cost-effective alternative for plug-in connections with only few or almost no mating cycles
Further information
