Hand crimping tools

Han CRIMP TOOL WITH LOCATOR

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 2.5 mm², Han-Yellock®: 0.5 ... 2.5 mm²Conductor cross-section: 0.14 ... 2.5 mm²

Han Hand Crimp Tool

Han D®: 0.14 ... 1.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6104/6204 and 09 15 000 6124/6224), Han E®: 0.5 ... 4 mm², Han-Yellock®: 0.5 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

Double-Indent Crimping Tool

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²

Crimping Tool Han C 4/6/10 mm2

Han® C: 4 ... 10 mm²Conductor cross-section: 4 ... 10 mm²

DSUB HAND CRIMP TOOL INN.COAX/SIGNAL C.

for turned male and female contacts, 4 indent crimp in acc. to MIL 22 520/2-01Conductor cross-section: 0.09 ... 0.82 mm²

basic hand crimp tool BC/FC/har-bus64

for individual DIN 41612 contacts, BC / FC / har-bus® 64

SUB-D CRIMP TOOL SINGLE CONTACT

for single stamped D-Sub contactConductor cross-section: 0.09 ... 0.56 mm²

D SUB HD SERVICE CRIMP TOOL

Crimptool Opening

for crimp barrel and crimp flange

DSUB HAND CRIMP TOOL POWER CONTACT

for power contactsConductor cross-section: 0.5 ... 6 mm²

DSUB HAND TOOLS

for 500 bandoliered standard contactsConductor cross-section: 0.09 ... 0.56 mm²

CRIMPING TOOL

for 250 bandoliered contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

Crimping tool for 1mm POF

for following 1 mm POF contacts, Han D®, Han E®, DIN 41626, Ferrule, F-SMA, -ST

DIN-Tool Crimptool Coax M

Crimp die included, for coaxial contact, acc. to DIN 41626

GDS A-B/C CRIMPING TOOL ON REEL

for 500 bandoliered contacts, BC / har-bus® 64Conductor cross-section: 0.09 ... 0.5 mm²

Ferrule Crimp tool 10mm2

for wire end ferrulesConductor cross-section: 10 mm²

DSUB HAND CRIMP TOOL OUTER COAX CONT.

for coaxial contact, acc. to DIN 41626, for outer ferrule

D-Sub DIE OUTER COAX CONTACT

for D-Sub

DIN-Tool Crimpzange FC2

for 250 bandoliered contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm²

Crimping tool Han-Fast Lock 4-10mm²

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 4 ... 10 mm²

CRIMPING TOOL FOR POF

for FO connector (plastic fibre), SC, F-SMA F-ST

Crimping tool for glass fibre

for FO connector (glass fibre), SC, F-SMA F-ST

Crimping tool Han-Fast Lock 1.5/2.5 mm²

Angled, for Han-Fast® Lock single contactConductor cross-section: 1.5 ... 2.5 mm²

Crimping Tool Han HsB 1.5/2.5/4 mm²

Han® HsB: 1.5 ... 4 mm²Conductor cross-section: 1.5 ... 4 mm²

Crimping Tool Han-Fast Lock 1.5/2.5mm²

for Han-Fast® Lock single contact, incl. locatorConductor cross-section: 1.5 ... 2.5 mm²

Crimping tool Han-Fast Lock 4-10mm² angl

Angled, for Han-Fast® Lock single contactConductor cross-section: 4 ... 10 mm²

DSUB HAND CRIMP TOOL SIGNAL CON.W.P

for signal contacts

D SUB HD CR. TOOL F.500 PCS REEL- CS 20

for 500 bandoliered D-Sub high density contacts

Ferrule crimp tool 16 / 25qmm

for wire end ferrulesConductor cross-section: 16 ... 25 mm²

Hand crimping tool UIC 558

HARTING UIC 558: 0.75 ... 1 mm²Conductor cross-section: 0.75 ... 1 mm²

Crimping Set FC3

for individual DIN 41612 contacts, FC 3Conductor cross-section: 0.5 ... 1.5 mm²

DIN-Tool Crimpzange Rolle FC1

for 250 bandoliered contacts, FC 1Conductor cross-section: 0.09 ... 0.25 mm²

Crimping Set FC2

for individual DIN 41612 contacts, FC 2Conductor cross-section: 0.14 ... 0.56 mm²

Crimping Set BC

for individual DIN 41612 contacts, BCConductor cross-section: 0.09 ... 0.5 mm²

RJI Gigalink Cat6A Assembly Tool

for HARTING RJ Industrial® Gigalink connectors

HPP V4 Power Crimp Tool

incl. locatorConductor cross-section: 0.08 ... 4 mm²

RJI PROFINET Cat5 Compact Assembly Tool

for HARTING RJ Industrial® PN Compact connector set

RJI Gigalink Cat6A Compact Assembly Tool

for HARTING RJ Industrial® Gigalink Cat. 6A connectors

DSUB TOP-TOOL FOR HOODS

for assembly of D-Sub hoods, Top part

T1 Industrial crimp tool (AWG 28-26)

for HARTING T1 Industrial contacts (AWG 28 ... AWG 26)

T1 Industrial crimp tool (AWG 24-22)

for HARTING T1 Industrial contacts (AWG 24 ... AWG 22)

Ferrule crimping tool 4-16mm²

for wire end ferrules, acc. to DIN 46228Conductor cross-section: 4 ... 16 mm²

Ferrule crimping tool 0,14-2,5mm²

for wire end ferrules, acc. to DIN 46228Conductor cross-section: 0.14 ... 2.5 mm²

Crimping Set FC1

for individual DIN 41612 contacts, FC 1Conductor cross-section: 0.09 ... 0.25 mm²

Service Crimp Tool FC1-3

for individual DIN 41612 contacts, for contacts FC 1, FC 2 and FC 3Conductor cross-section: 0.25 mm² for FC 1 contacts 0.25 ... 0.56 mm² for FC 2 contacts 0.75 ... 1.5 mm² for FC 3 contacts

Four-Indent Crimping Tool

Han D®: 0.14 ... 2.5 mm² (in the range from 0.14 ... 0.37 mm² only suitable for contacts 09 15 000 6107/6207 and 09 15 000 6127/6227), Han E®: 0.14 ... 4 mm², Han-Yellock®: 0.14 ... 4 mm², Han® C: 1.5 ... 4 mm²Conductor cross-section: 0.14 ... 4 mm²

DSUB DIE INNER COAX CONTACT

for inner contact die

M23 crimping tool for signal contact

for M23 signal contactsConductor cross-section: 0.08 ... 2.5 mm²

M17 crimping tool for single contacts

for M17 contactsConductor cross-section: 0.08 ... 2.5 mm²

ix Industrial handtool insert 3

for ix Industrial® assembly tool, for in-line cable jack variant, for HARTING ix Industrial® to assamble the cable strain relief crimping