Assembly tools

DSUB INSERTION-REMOVAL-TOOL

for single D-Sub standard contacts

Insertion Tool, Han

for crimp contacts

Insertion/Removal Tool D-Sub

Han-Modular®, for D-Sub crimp contact

D SUB HD INSERTION EXTRACTION TOOL

for single D-Sub high density contacts

Mounting tool Han D/E/Yellock

for crimp contacts, Small cross-section, Variable length of blade, Han D®, Han E®, Han-Yellock®

DIN-TOOL MONTAGE CRIMP FC

DIN 41612, for contacts FC 1, FC 2 and FC 3

Hexagonal Screw Driver SW 2

for axial screw, With grip, 40 A contactWrench size: 2

preLink Assembly tool

for preLink® termination block

Removal Tool f. Han ES

for Han® ES insert

hexagonal wrench adapter SW2

Bit ¼in, 40 A contact, for axial screwWrench size: 2

DIN-Tool Montage Crimp BC

DIN 41612, for contacts BC / har-bus® 64

Single Bit guiding pins/bushes

M12 dynamometric screwdriver SW15

for M12 Slim DesignWrench size: 15

Hexagonal Wrench Adapter SW2,5

Bit ¼in, 70 A contact, for axial screwWrench size: 2.5

Torque Set Power Contacts SW2,5/2/PH2

for power contact, incl. reversing blade (AF 2.0 + AF 2.5 + PH2), + different bits, + adapter blade, Tightening torque: 1 ... 5 Nm

insertion/removal tool Han 1A/D-Sub

for D-Sub crimp contact, Han® 1A

POLISH PAPER FOR POF GRAIN SIZE 1

for POF grain size 1000

Ball end hexagonal screwdriver SW2.5x100

for InduCom hoods with hexagonal screws, With ball end

Torque driver set for guide pins/bushing

for guiding pins and bushes, Tightening torque: 0.5 Nm, incl. 1/4in Bit

M12-TORQUE KEY SW17 (0,6Nm)

for M12-LWrench size: 17

Hexagonal screwdriver SW5-for 200A+350A

With grip, for axial screwWrench size: 5

hexagonal wrench adapter SW4

Adapter 3/8in, for axial screwWrench size: 4

Screwdriver Set Han VDE

The standard set

har-flexicon screw driver, 2.0 x 40

2.0 x 40

hexagonal wrench adapter SW5

Adapter 3/8in, for axial screwWrench size: 5

POLISH TOOL FOR 2.2MM POF CABLE

POF cable 2.2 mm diameter

Torque Set HC SW 4/5

for High Current axial screw contact, incl. reversing blade (AF 4.0 + AF 5.0), Tightening torque: 5 ... 14 Nm

M12-Torque key SW13 (0,6Nm)

for M12-SWrench size: 13

Screw Driver Set Slimline

Insolated blade for slim assembly

hexagonal wrench adapter SW8

Adapter 3/8in, for axial screwWrench size: 8

assembly- disassembly tool

Han® EasyCon, for assembly and disassembly of shielding clamps

M8 Assembley Key SW9 (0,4 Nm)

for M8Wrench size: 9

Torque Driver Han 3A, 4A, Q5/0, Staf

Han® 3 A, Han® 3 A Push-In, Han® Q 5/0, Staf®

Torque Set Power Han Screw E/A/Fixing

for HARTING screw contacts and fixing screws, Tightening torque: 0.5 ... 1.2 Nm

Polish tool for DIN 41626

DIN 41612

har-flexicon screw driver, 1.5 x 40

1.5 x 40

7/8"-Torque key SW22 (1,5Nm)

for 7/8"Wrench size: 22

Replacement sleeve for 09990000847

for part number 09 99 000 0847

Polish paper for glass fibre, gra in siz

for GI 1 μ-grain size

TOOL KIT POF 2

With measuring device

Polish tool for SC

SC

Polish paper for glass fibre, gra in siz

for GI 9 μ-grain size

Polish tool for FH-ST

F-ST

Polierset HP duplex

Assembly Tool Han F+B cable gland

Han® F+B, Cable gland

Mounting tool for flange - hood 50P

for flange, for D-Sub hoods (50 contacts)

Mounting tool for flange - hood 9-37P

for flange, for D-Sub hoods (9-37 contacts)

ix Industrial assembly tool

for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

Tool kit glass fibre

Only measuring device

har-bus HM. Tool kit shroud removal

for har-bus® HM shrouds

HPP V4 Power contact insertion tool

HARTING PushPull (V4) Power, for an easy insertion of male and female contacts into the insulation body

DSUB BOTTOM-TOOL FOR HOODS

for assembly of D-Sub hoods, Bottom part

DIN-Tool Kodierzange

DIN 41612, for breaking out the coding area

GDS A-F CODEPIN INSERTION TOOL

DIN 41612, Insertion tool for coding pin

Einsetz- und Richtwerkz.f. Einzelkontakt

har-bus® HM, Insertion tool for single male press-in contacts

har-port assembly tool

To tighten the har-port fixing nut

M12-ACC-TORQUE WRENCH SW18

for M12 PowerWrench size: 18

M8-ACC-TORQUE WRENCH SW13

for M8Wrench size: 13

har-modular assembling aid

ix Industrial handtool insert 2

for ix Industrial® assembly tool, for angled variant, for HARTING ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

ix Industrial handtool frame

ix Industrial handtool insert 1

for ix Industrial® assembly tool, for straight variant, for HARTING ix Industrial® and HARTING Mini PushPull ix Industrial® to assemble the single wire to the IDC and the cable strain relief crimping

Insertion Tool Han-Mod f. single modules

Han-Modular®, for single modules

Polish tool for ferrule

Ferrule

Polish tool for SC POF

SC POF

One Click Cleaner 2,5 mm

2.5 mm

One Click Cleaner 1,25 mm

1.25 mm

Tool for single pole size 1&2

For SP1 and SP2Wrench size: 46

har-modular assem. aid for 2-row-coupler

for distance fixing brackets

ix Industrial assembly positioner

for HARTING ix Industrial® IP20 PushPull and Mini PushPull ix Industrial® for positioning the cable guides on the IDC unit. Required for the assembly of AWG 22 variants.

har-flex assembly tool, IDC to board

for har-flex® Board IDC